Watching 2 channels at the same time While watching digital TV:
Press 
once to display the current programme in an inset window (Picture in Picture, or PiP).
Press 
a second time to view both programmes side by side on the screen (PaP).You can press the P+/- key to change the channel displayed on the left picture.
Press 
a third time to return to normal viewing.
Note
When a recording is in progress, one of the two channel has to be the recorded channel. Accessing to MHEG5 interactivity (red button) is not possible when you are using Pip or Pap: this is signalled by “data service” message.
4.2Controlling Live TV
When you begin to watch live TV, your Digital Terrestrial Receiver begins to store whatever you watch into the time shift buffer, which gives you control over live TV.
Each time you change channels, the watched programme is stored in a new title into the time shift buffer.
Once you have stored programmes into the time shift buffer, you can watch it again by using a free navigation through the time shift bar, by doing an Instant Replay or by accessing previous programmes.
Note
The time shift buffer stores up to 3 hours of live TV.After 3 hours, the oldest part of the recording is overwritten.
The time shift buffer is emptied when you turn your Digital Terrestrial Receiver to standby.
Time shift bar
The time shift bar is a
Press OK to display the time shift bar.
At any time, Press OK or EXIT to hide the time shift bar.
All Time shift bar commands are availabe on live or recorded content.
16 | Using your Digital Terrestrial Receiver |