3 Getting started
The basic steps to get you started are described in this chapter.
3.1Prepare
Prepare the remote control
Prepare the smart card
To be able to receive scrambled digital channels from
E N G L I S H
Open the battery compartment.
Insert the two batteries supplied according to the indications
Close the battery compartment.
Note
Point the remote control directly at the remote sensor on the front panel and select the desired function.
Caution
Do not mix batteries or keep them in the remote control for long periods of time without use. Batteries must not be disposed of with your household waste but to a local separate battery collection system.
Do not dispose of batteries in a fire.
Warning
Insert the smart card with the chip facing down.
Notes
•You can access the information stored on the smart card by selecting MENU, and then the Menu/Settings/Smart Card submenu.
•For more information about smart cards or operators, consult your installer or dealer.
Getting started | 9 |