Philips DTR 7510, DTR7510/05 PIN Code, 5.9.3Installation, Channel installation, Antenna setting

PIN Code

To change your PIN Code:

Enter your PIN Code.

Enter your new PIN Code.

Enter your new PIN Code again.

Note

Once you have changed your PIN Code, keep it secret to prevent others from using it. If you forget or lose your PIN Code, refer to chapter Frequently asked questions.

Note

The PIN Code default value is 0000.

5.9.3Installation

Once you are in the Settings menu, select Installation using the / arrow keys. Press OK.

This menu is used to:

•Manage channel installation

•Position your antenna - Test signal level and quality

•Manage the Hard Disk Drive

•Check software upgrades and information

•Restore the Digital Terrestrial Receiver factory settings.

Disabling Hard drive is a way to reduce Fan noise. HDD is a source of heat and not using it reduces the need for using the internal fan.

Use more of your Digital Terrestrial Receiver

Channel installation

This sub-menu is used to manage channel installation and update TV/Radio services in the main list

•Update installation: manual update

•Full installation: choose between fast, (recommanded) automatic and advanced. (long) see Retune page 11

•Erase channel lists: Use this option to delete all channels and favorite lists.

Antenna setting

This sub-menu is used to check the signal level and quality. If the signal power and quality is not adequate, adjust your antenna.

Note

For information on the UHF channels available in your area refer to your local dealer.

Hard disk drive

•Record files: press OK to delete all

•Format disk: press OK to format disk

•Hard disk drive: use the / arrow keys to enable or disable Hard Disk Drive.

Note

•Disabling the Hard Disk Drive also disables all the recording functions and Time Shift Buffer functions.You won’t be able to access the recorded programmes.

•Information on the HDD reference and capacity is displayed in the bottom right corner.

37

E N G L I S H