5Use more of your Digital Terrestrial Receiver
This chapter gives a complete description the functionalities of your Digital Terrestrial Receiver.
5.1Digital Terrestrial Receiver full overview
1 | 2 | 3 | 4 | 5 | 6 | 7 8 9 | 10 | 11 |
Front Panel
1 | 2 | 3 | 4 | 5 | 6 | 7 |
Rear Panel
Front Panel
1
STANDBY button with indicator, switch to standby/wake up
Green LED: watching mode
Red LED: standby mode
Orange LED: initialisation mode
2
3P+, next programme
4RECORD, instant recording
5Recording LED, indicates recording
6Display panel
7EPG, open/close EPG
8HDD, open/close HDD library
9USB, access USB contents
10 USB connector*
11 Smart card reader
22
8 9
Rear Panel
1RF IN*, input to connect your aerial cable from the wall socket
2RF OUT*, output to connect your recorder to a VCR/TV set/another receiver
3AUX scart* output to connect your external recorder or DVD player
4TV scart*, output to connect your TV set
5 SPDIF*, digital audio output
6 L/R audio*, Left/Right analogue audio outputs
7HDMI*, output to connect your TV set with HDMI input
8 ON/OFF switch**, turn on/off your Digital
Terrestrial Receiver
9Power**, output to connect the mains cord
*Safety extra low voltage ** Hazardous voltage
Use more of your Digital Terrestrial Receiver