Kyocera FS-6970DN manual Transparency Interleaving, Interleaving Transparencies

Publishing

Check Box Selection	Page Insertion Type
Page insert	Prints on both sides of the inserted
	page.
Print onto front
Print onto back

Transparency Interleaving

Transparency interleaving inserts a backing sheet between printed transparencies. The backing sheet, also known as an interleaf, helps keep transparencies clean and prevents them from clinging together. This feature is only available when printing on transparencies supplied from the MP tray. You can print the same content on the backing pages as on the transparencies.

Transparency interleaving cannot be used together with Cover mode or

Page insert.

Interleaving Transparencies

To insert backing sheets between transparencies, follow these steps:

1 In the Basic tab, in the Media type list, select Transparency. If the Source and Media type lists have been combined (by a selection in the Device Settings tab, in the Compatibility Settings dialog box), Media type does not appear. Instead, in the Source list select Auto (Transparency).

2

3

4

5

6

Click the Publishing tab.

In the Publishing tab, select the Transparency interleaving check box. To print the transparency content on the inserted pages as well, select the Print onto backing check box.

In the Media for backing list, select the Media type of the backing sheet or the Source paper cassette. When you choose the Media type, the Source cassette where that media is loaded is automatically selected.

Click OK to return to the Print dialog box.

Click OK to begin printing.

The printing system's operation panel prompts you to load transparencies into the MP tray, and, if necessary, load backing paper into the selected cassette.

7-7 User Guide