Philips PT-FW100NTU manual Projector body, About Your Projector, Top and front view, Control panel

Page 12

Preparation

About Your Projector

Projector body

Top and front view

Indicators

POWER indicator (page 20)

LAMP indicator (page 39)

TEMP indicator (page 39)

FILTER indicator (page 39)

Remote control signal receptor (page 23)

ALS (Ambient Luminance Sensor) (page 30)

Lens shift lever (page 16)

Air intake port

		Speaker
Projection lens	Front panel cover
Levers	Hold both side of the top corner of
	the Front panel cover to open or
Focus lever (page 22)	close.
Zoom lever (page 22)	While not operating the
	controls panel, keep the Front
	panel cover closed.
POWER button		Navigation buttons
While the MAIN POWER is on,		Navigate through the menus with FGIH,
switch between stand-by mode		and activate the menu item with ENTER.
and projection mode. (page 20)		(page 27)

Control panel

INPUT SELECT button

Switch to cycle through the input method. (page 22)

MENU button

Display the MAIN MENU. (page 27)

RETURN button

Return to the previous menu. (page 27)

NOTE:

•Do not cover the ventilation openings or place anything within 50 cm (20") of them as this may cause damage or injury.

•While the projector is not in use, keep the FRONT PANEL COVER closed to protect the lens.

ENGLISH - 12

Image 12

Contents Model No. PT-FW100NTU Important Safety Notice Important InformationPT-FW100NTU Important Safety Notice Declaration of ConformityTrade Name PanasonicContents Settings MaintenanceContents AppendixPrecautions with regard to safety Precautions with regard to safety Do not set up the projector outdoorsDo not look into the lens while the projector is being used Use only the specified batteriesRemove the used batteries from the remote control promptly Do not put your weight on this projectorDo not mix old and new batteries Electric shocks can result if this is not doneAccessories Minimum required setting screen Read this firstPreparation Remote control About Your ProjectorProjector body About Your ProjectorTop and front view Control panelAbout Your Projector Back and bottom view Computer. Selectable for inputOutput by menu operation Setting up Calculation methods for screen dimensionsScreen size and throw distance Getting StartedFront leg adjusters and throwing angle Setting upProjection method Mounting in the ceiling and projecting from frontAdjusting the Lens shift lever Lens shift and positioningHorizontal shift Vertical shiftSetting up Projector location range When the screen position is fixedWhen the projector position is fixed Connecting with computers ConnectionsBefore connection to the projector LAN terminalConnecting with AV equipment Connecting with Video IN/S-VIDEOConnecting with Component ConnectionsSwitching the projector on/off Power cordPower indicator Switching on the projector Switching off the projectorSwitching the projector on/off Switch the Main Power on Press the Power buttonSelecting the input signal Projecting an imagePositioning the image Focus lever Zoom leverRemote control operation Setting up the image position automaticallyOperating range OperationSwitching the input signal Using the laser pointerResetting to the factory default settings Projecting an image in INDEX-WINDOW modeCapturing an image Stopping the projection temporaryControlling the volume of the speaker Projecting 2 images at a timeEnlarging the centred area Adjusting with the bar scale items Menu NavigationNavigating through the Menu Displaying the Main menuMain menu and Sub-menu Menu NavigationPassword Change Network Standby ContentsWEB Control Live Mode CUT Status Initialize 169 1610Picture menu Detailed Setup For S-VIDEO/VIDEO signalsFor RGB signals Position menu Aspect ratio depend on signals Frame LockScreen Format menu OptionOption menu Power OFF Timer Auto SetupSignal Search Direct Power onHighland Closed CaptionTest Pattern Input Password Password ChangeSecurity menu Text DisplayNetwork menu Items in Network menuNetwork menu, the following items are available TEMP, Lamp and Filter Indicators Managing the indicated problemsLamp indicator Temp indicatorCare and Replacement Cleaning the projectorReplacing the ARF Auto Rolling Filter Care and Replacement Resetting the Filter When to replace the Lamp unitReplacing the Lamp unit Before replacing the Lamp unitCeiling mount bracket safeguards Care and Replacement Replacement procedureInstalling the safety cable Removing and replacing the lamp unitTroubleshooting List of compatible signals Technical InformationQuality *2 Dots *1 KHz MHzSerial terminal Technical Information Cable specifications Control commandsComputer connection guidance ProjectorLamp switching Switching input SignalsInput signal Remote terminalSpecifications COMPONENT1 OUTAudio Computer AudioScreen size and throw distance for 169 aspect ratio Screen size and throw distance for 43 aspect ratioDimensions Trademark acknowledgementsUnit mm These Operating Instructions are printed on recycled paperIndex ALS Ambient Luminance Sensor ARF Auto Rolling FilterCalculation methods LeverIndex Mains leadNavigation buttons Screen sizeAvis important concernant la sécurité Imformation ImportanteNuméro de série Avis important concernant la sécurité Information ImportanteAvertissement AdvertenciaPrécautions de sécurité AvertissementMises EN Garde Précautions de sécuritéUtiliser uniquement les piles spécifiées Ne pas mélanger des piles usées et des piles neuvesSinon cela peut causer des chocs électriques Précautions lors de linstallation Précautions lors du transportPrécautions lors de lutilisation Remplacement de lunité de la lampe Délai de remplacement de lUnité de la lampeAvant de remplacer le lUnité de la lampe Installation du câble de sécurité Protections du support de montage au plafondRetirer et remplacer la lampe De lUnité dePanasonic Projector Systems Company Technical Support