Philips PT-FW100NTU manual Detailed Setup, For S-VIDEO/VIDEO signals, For RGB signals

Page 31

				PICTURE menu

			STILL MODE
		DETAILED SETUP	STILL MODE
		DETAILED SETUP	You can reduce the vertical flicker when projecting
	You can perform more detailed image adjustment		a still image.
	You can perform more detailed image adjustment		OFF:	Deactive
	manually.		OFF:	Deactive
	manually.		ON:	Active
		For S-VIDEO/VIDEO signals	ON:	Active
		For S-VIDEO/VIDEO signals

TV-SYSTEM

When the video signal is changed, the setting switches automatically. You can switch the setting manually to match the video data. Press I H to cycle through the options.

AUTO

NOTE:

• Set to OFF when projecting a moving image.

NOISE REDUCTION

You can switch the automatic noise reduction system on/off. Press I H to select the required setting.

ON: Automatic noise reduction

OFF: No noise reduction

NTSC

SECAM

NTSC 4.43

PAL-N

PAL

PAL-M

NOTE:

•AUTO setting will select from NTSC/NTSC 4.43/PAL/ PAL60/PAL-M/PAL-N/SECAM.

NOTE:

• Applying noise reduction may affect image quality.

For RGB signals

WHITE BALANCE

You can adjust the white balance more properly in 3 colors temperature by pressing I H.

WHITE BALANCE RED

WHITE BALANCE GREEN

WHITE BALANCE BLUE

Settings

ENGLISH - 31

Image 31

Contents Model No. PT-FW100NTU Important Information Important Safety NoticePT-FW100NTU Panasonic Important Safety NoticeDeclaration of Conformity Trade NameContents Appendix SettingsMaintenance ContentsPrecautions with regard to safety Use only the specified batteries Precautions with regard to safetyDo not set up the projector outdoors Do not look into the lens while the projector is being usedElectric shocks can result if this is not done Remove the used batteries from the remote control promptlyDo not put your weight on this projector Do not mix old and new batteriesAccessories Read this first Minimum required setting screenPreparation About Your Projector Remote controlControl panel Projector bodyAbout Your Projector Top and front viewComputer. Selectable for input About Your Projector Back and bottom viewOutput by menu operation Getting Started Setting upCalculation methods for screen dimensions Screen size and throw distanceMounting in the ceiling and projecting from front Front leg adjusters and throwing angleSetting up Projection methodVertical shift Adjusting the Lens shift leverLens shift and positioning Horizontal shiftWhen the screen position is fixed Setting up Projector location rangeWhen the projector position is fixed LAN terminal Connecting with computersConnections Before connection to the projectorConnections Connecting with AV equipmentConnecting with Video IN/S-VIDEO Connecting with ComponentPower cord Switching the projector on/offPower indicator Switch the Main Power on Press the Power button Switching on the projectorSwitching off the projector Switching the projector on/offFocus lever Zoom lever Selecting the input signalProjecting an image Positioning the imageOperation Remote control operationSetting up the image position automatically Operating rangeUsing the laser pointer Switching the input signalStopping the projection temporary Resetting to the factory default settingsProjecting an image in INDEX-WINDOW mode Capturing an imageProjecting 2 images at a time Controlling the volume of the speakerEnlarging the centred area Displaying the Main menu Adjusting with the bar scale itemsMenu Navigation Navigating through the MenuMenu Navigation Main menu and Sub-menu169 1610 Password Change Network StandbyContents WEB Control Live Mode CUT Status InitializePicture menu For S-VIDEO/VIDEO signals Detailed SetupFor RGB signals Position menu Option Aspect ratio depend on signalsFrame Lock Screen Format menuOption menu Direct Power on Power OFF TimerAuto Setup Signal SearchClosed Caption HighlandTest Pattern Text Display Input PasswordPassword Change Security menuItems in Network menu Network menuNetwork menu, the following items are available Temp indicator TEMP, Lamp and Filter IndicatorsManaging the indicated problems Lamp indicatorCleaning the projector Care and ReplacementReplacing the ARF Auto Rolling Filter Before replacing the Lamp unit Care and Replacement Resetting the FilterWhen to replace the Lamp unit Replacing the Lamp unitRemoving and replacing the lamp unit Ceiling mount bracket safeguardsCare and Replacement Replacement procedure Installing the safety cableTroubleshooting Dots *1 KHz MHz List of compatible signalsTechnical Information Quality *2Serial terminal Projector Technical Information Cable specificationsControl commands Computer connection guidanceRemote terminal Lamp switchingSwitching input Signals Input signalSpecifications Computer Audio COMPONENT1OUT AudioScreen size and throw distance for 43 aspect ratio Screen size and throw distance for 169 aspect ratioThese Operating Instructions are printed on recycled paper DimensionsTrademark acknowledgements Unit mmLever IndexALS Ambient Luminance Sensor ARF Auto Rolling Filter Calculation methodsScreen size IndexMains lead Navigation buttonsImformation Importante Avis important concernant la sécuritéNuméro de série Advertencia Avis important concernant la sécuritéInformation Importante AvertissementAvertissement Précautions de sécuritéPrécautions de sécurité Mises EN GardeNe pas mélanger des piles usées et des piles neuves Utiliser uniquement les piles spécifiéesSinon cela peut causer des chocs électriques Précautions lors du transport Précautions lors de linstallationPrécautions lors de lutilisation Délai de remplacement de lUnité de la lampe Remplacement de lunité de la lampeAvant de remplacer le lUnité de la lampe De lUnité de Installation du câble de sécuritéProtections du support de montage au plafond Retirer et remplacer la lampeTechnical Support Panasonic Projector Systems Company