Philips 27964-01A user manual Attach Gas Springs, Installation - Assembly Procedures

Page 13

Installation - Assembly Procedures

Attach Gas Springs

1.With the canopy still raised, slip the bronze bushings into the hole in the clevis brackets on the underside of the canopy arms.

2.Line up both clevis forks and carefully

	lower the canopy to engage the clevis	Clevis Bracket
	forks. Pay special attention when low-	Clevis Bracket
	forks. Pay special attention when low-
	ering the canopy that the clevis forks
	do not damage the bronze bushings.
	Bronze is excellent for smooth pivot-
	ing applications such as this, but
	tends to be soft compared to the
	steel clevis fork.

3.Lock the clevis forks in place

with the 10mm clevis pins.

4.Secure the clevis pins with the retaining rings.

NOTE: When this assembly is complete, lift and lower the canopy a few times to lubricate the gas springs for optimum per- formance.

27964-01A

Image 13

Contents 27964-01A USER MANUALETS, LLC 7445 Company Drive, Indianapolis, IN 24 MONTH “SILVER MEDAL” WARRANTYontents elcomeSafety Information Installation Care and MaintenanceRECOMMENDED EXPOSURE TIMES IN MINUTES afety InformationMAXIMUM EXPOSURE TIME IS 20 MINUTES Velocity Wolff Model VEL 71-T12-100WTEMPS D’EXPOSITION RECOMMANDÉ EN MINUTES Renseignements sur la SécuritéVelocity Wolff Modèle VEL 71-T12-100W LE TEMPS D’EXPOSITION MAXIMAL EST DE 20 MINUTESUnpacking and Inspection nstallationTools Required Installation - Pre-Installation Planning Pre-Installation PlanningHardware Inventory Installation - Hardware InventoryInstallation - Assembly Procedures Assembly ProceduresLower Clevis Fork Assembly LOCKNUT others hidden STAND UPRIGHT MACHINE SCREWS 27964-01A Stand Upright AssemblyCanopy Installation 3. Screw the upper clevis forks onto the Install Gas Springs1. Have a helper hold the canopy in its gas springsAttach Gas Springs Attach Cover Panels Attaching Handle to Canopy Shock hazard Be sure power is disconnected before installing body fan Body Fan AssemblyCENTER INSERT27964 -01A body fan sold separatelyElectrical Connections Installation - Electrical ConnectionsRemote Connections T-Max Wireless Remote SystemT-Max Products Remote System Hook-up ScenariosScenario 1 - T-Max Manager Series with Complete Wireless Installation - Remote ConnectionsScenario 2 - T-Max 3A with Wireless Scenario 3 - T-Max Manager Series with Wireless comboScenario 5 - T-Max Manager Series with wires Scenario 4 - T-Max Manager Series with Wireless comboScenario 6 - Single Bed wired to T-Max 3A Setting the “id” Setting the sunbed address manually1-99 100-199 Before You Tan perationExposure Times DANGEROperation - Using Your Sunbed Using Your SunbedA BC D E F G body using the canopy handle. See Safety Cleaning After Use are and MaintenanceThorough Periodic Cleaning Cleaning the Canopy and BenchCare and Maintenance - Lamp and Acrylic Replacement Lamp and Acrylic ReplacementRemoving/Replacing Acrylic Shield Recommended Replacement Acrylics Recommended Replacement LampsRemoving/Replacing Lamps Velocity Wolff Model VEL 71-T12-100WDANGER Removing/Replacing Face Tanner Lamp if equippedSolution Problemroubleshooting Clean sunbed, see Thorough Periodic CleaningConnections TroubleshootingRemote Connections My bed is connected to a T-MaxS-30SV S-32SVS-30SV3F S-32SV3F Parts List 30 3F SUNVISION Elite32SV32SV3F