Philips 27964-01A user manual Installation - Electrical Connections

Page 17

Installation - Electrical Connections

Installation - Electrical Connections

Electrical Connections

At the rear of the bed, insert canopy plug

(A)into bench socket (B). Connect power cord (C) as described in Pre-Installation Planning. Again, a professional electrician is recommended. The Remote Control Bypass plug is already installed in one of the remote control ports as shown. Your sunbed will not operate without the Remote Control Bypass plug or a remote system connected. Remove the protective film from the acrylic shields. Your equip- ment is now ready for use.

NOTE: Your sunbed is designed to accept an input from a remote control device. The remote control is optional. If you plan on using a remote system refer to Remote Connections.

ATTENTION: Although the Remote Control Bypass plug provided with your sunbed will work wherever a T-Max® ter- minator is called for in the series, the T- Max® terminator will not work as a bypass plug. A bypass plug is needed only when your sunbed is operated without a remote system connected.

Remote Control

Ports

Remote Control

Bypass plug

27964-01A

12

Image 17

Contents 27964-01A USER MANUALETS, LLC 7445 Company Drive, Indianapolis, IN 24 MONTH “SILVER MEDAL” WARRANTYontents elcomeSafety Information Installation Care and MaintenanceRECOMMENDED EXPOSURE TIMES IN MINUTES afety InformationMAXIMUM EXPOSURE TIME IS 20 MINUTES Velocity Wolff Model VEL 71-T12-100WTEMPS D’EXPOSITION RECOMMANDÉ EN MINUTES Renseignements sur la SécuritéVelocity Wolff Modèle VEL 71-T12-100W LE TEMPS D’EXPOSITION MAXIMAL EST DE 20 MINUTESTools Required nstallationUnpacking and Inspection Installation - Pre-Installation Planning Pre-Installation PlanningHardware Inventory Installation - Hardware InventoryLower Clevis Fork Assembly Assembly ProceduresInstallation - Assembly Procedures LOCKNUT others hidden STAND UPRIGHT MACHINE SCREWS 27964-01A Stand Upright AssemblyCanopy Installation 3. Screw the upper clevis forks onto the Install Gas Springs1. Have a helper hold the canopy in its gas springsAttach Gas Springs Attach Cover Panels Attaching Handle to Canopy Shock hazard Be sure power is disconnected before installing body fan Body Fan AssemblyCENTER INSERT27964 -01A body fan sold separatelyElectrical Connections Installation - Electrical ConnectionsRemote Connections T-Max Wireless Remote SystemT-Max Products Remote System Hook-up ScenariosScenario 1 - T-Max Manager Series with Complete Wireless Installation - Remote ConnectionsScenario 2 - T-Max 3A with Wireless Scenario 3 - T-Max Manager Series with Wireless comboScenario 6 - Single Bed wired to T-Max 3A Scenario 4 - T-Max Manager Series with Wireless comboScenario 5 - T-Max Manager Series with wires 1-99 100-199 Setting the sunbed address manuallySetting the “id” Before You Tan perationExposure Times DANGERA BC D E F G Using Your SunbedOperation - Using Your Sunbed body using the canopy handle. See Safety Cleaning After Use are and MaintenanceThorough Periodic Cleaning Cleaning the Canopy and BenchRemoving/Replacing Acrylic Shield Lamp and Acrylic ReplacementCare and Maintenance - Lamp and Acrylic Replacement Recommended Replacement Acrylics Recommended Replacement LampsRemoving/Replacing Lamps Velocity Wolff Model VEL 71-T12-100WDANGER Removing/Replacing Face Tanner Lamp if equippedSolution Problemroubleshooting Clean sunbed, see Thorough Periodic CleaningConnections TroubleshootingRemote Connections My bed is connected to a T-MaxS-30SV S-32SVS-30SV3F S-32SV3F Parts List 30 3F SUNVISION Elite32SV32SV3F