Philips SBC SP 370 manual English, Introduction

English

INTRODUCTION

Congratulations on your purchase of the Philips Power switch (SBC SP370). This switch can be used together with a Philips Power remote control (SBC SR315). With the Power Remote Control system you can operate electrical appliances (e.g. lamps, coffee-maker etc.) in and around your house via the remote control without getting out of your chair! Before connecting an appliance to the Power switch, please read this document carefully.

QUICK REFERENCE

1.Make sure the house code of the new Power switch is the same as with the used remote control (fig.1).

2.Connect the Power switch to a mains power outlet (fig. 2).

3Select the appliance, e.g. a lamp, you want to control and plug it into the Power switch (fig. 2).

•Check the power consumption of the selected appliance before plugging it into the Power switch. This Power switch can control appliances with a maximum power rating of 1000 Watts!

•If the selected appliance has its own ON/OFF switch, make sure it is switched on.

4.Use the remote control to operate the appliance (fig. 3). The Power switch operates with button 1 as its default setting.

If the right side (+) of the button is pressed, the appliance switches on. If the left side (-) of the button is pressed, the appliance switches off again.

4