Philips SBC SP 370 manual Installation

English

Note: Although the unit code on the Power switch can be set from 1 to 16, the remote control can only operate Power switches with unit code set from 1 to 8.

•To operate Power switches with unit code 1-4, the toggle switch on the remote control should be set to the left (1-4).

–The first 4 buttons on the remote control correspond with unit code 1 to 4 respectively.

–If the toggle switch on the remote control is set to the right (5-8), the first 4 buttons correspond with unit code 5 to 8 respectively.

INSTALLATION

Your appliance must be connected to the Power switch before you can control it with the remote control (fig. 2).

•Select the appliance (e.g. a lamp) you want to control and plug it into the Power switch (fig. 2).

•Please check the power consumption of the selected appliance. The Power switch can control appliances with a maximum power rating of 1000 Watts!

•If the selected appliance has its own ON/OFF switch, make sure it is switched on.

6