Black Box LB1351A, LB1350A manual Parts Identification, Comments

Black Box®LB1350A/LB1351A

7 - PARTS IDENTIFICATION

	Black Box®LB1350A	Black Box®LB1351A	COMMENTS
1	Power ON LED	Power ON LED
2	TEST mode LED	TEST mode LED	Linked to DIP switch #8
3	Duplex SC connector	Duplex SC connector
4	F/O FDX mode LED	F/O FDX mode LED
5	F/O Link/Activity	F/O Link/Activity	Lit steady – LINK ON;
			blinking - receive
6	Mode Setup (DIP)	Mode Setup (DIP)	See section 12 for details
	switches	switches	( page 16 )
7	N/A	Mini DIN RS-232
		connector
8	N/A	Receive LED	Management activity
9	N/A	Ready LED	Management module OK
10	RJ-45 ports 1 to 4	N/A
11	N/A	RJ-45 ports 1 to 3
12	Link/Activity ports 1- 4	Link/Activity ports 1-	Lit steady – LINK ON;
	LED	3 LED	blinking - receive
13	Full Duplex ports 1-4	Full Duplex ports 1-3	Lit when FDX detected or
	LED	LED	forced
14	100Mbps ports 1-4	100Mbps ports 1-3	Lit when 100Mbps
	LED	LED	detected or forced

NOTE: All Duplex mode LEDs – blinking indicates collisions on respective port (in HDX mode only)

11