Black Box®LB1350A/LB1351A
Basic ports' status:
#Type Link Duplex AutoNego Rate Connected
================================================
1 | TP | Off | FDX | Disabled | 100M | Yes |
2 | TP | Off | n/a | Enabled | n/a | Yes |
3 | TP | Off | n/a | Enabled | n/a | Yes |
4 | FO | Off | FDX | 100M | Yes |
================================================
Basic device status:
VLAN: enabled
Temperature: 39C
figure 6-3 - basic status
Basic status
This status includes the basic ports’ status and the basic device status. Basic port’s status gives the following data about each port:
•Port number
•Interface type (TP/FO)
•Link status (On/Off)
•Duplex mode (FDX/HDX)
•
•Data rate (10/100M)
•Connection mode (connected/disconnected)
The basic device status includes:
•VLAN mode (enabled/disabled)
•Device’s temperature (in centigrade)
Advanced ports' status:
#Type Tag: Insert Strip VID Priority: Port 802.1p TOS User
==============================================================
1 | TP | No | No | 0 | No | No | No | 0 | |
2 | TP | No | No | 0 | No | No | No | 0 | |
3 | TP | No | No | 0 | No | No | No | 0 | |
4 | FO | No | No | 0 | No | No | No | 0 | |
| Mgmt | No | Yes | 222 | No | No | No | 0 |
==============================================================
Advanced device status:
Test: | Off |
Priority ratio: | Always high |
Broadcast: | Allow 25% broadcasts |
DSCP (63 <- 0):
User priority: code: 0 1 2 3 4 5 6 7 prio: LO LO LO LO HI HI HI HI
figure 6-4 - advanced status
25