Black Box ServSwitch manual Share, Scan, Logout

Page 63

MATRIX SERVSWITCH™

Share

Use this field to set the “Share-mode timeout,” in seconds, for each user profile. If the connection mode for a given profile is “Share” (see the Connect heading above), this timeout determines how long users with that profile have to leave their keyboard and mice idle before another user can take keyboard and mouse control of the computer they were using. Factory default is 2 seconds; available settings are 0 seconds (instant timeout) to 9999 seconds (roughly two and three-quarter hours). This setting is irrelevant if the profile is set to connect in a mode other than Share.

Scan

Use this field to set the scan rate in seconds for each profile. When a user is scanning the CPUs (see Section 6.15), the scan rate is the length of time that the Matrix ServSwitch shows each computer’s video on the user’s screen before changing to the next computer in sequence. Be careful: It is possible to set the scan rate low enough that a slower-synchronizing monitor may not display any video at all. If this occurs (typically at settings below 4 seconds), raise the scan rate accordingly. Factory default is 5 seconds; available settings are 0 seconds (no scan delay at all, not recommended) to 9999 seconds (roughly two and three-quarter hours).

Logout

Use this field to set the automatic logout timeout for each profile. When logins are enabled (see Section 4.4), this setting determines how long a user with this profile can leave their keyboard and mouse inactive before being logged out of the system. (Users at user stations where logins are disabled can remain connected to their selected computers indefinitely, regardless of this setting.) Factory default is

240 minutes (4 hours) of inactivity; available settings are 1 minute to 9999 minutes (roughly a week). You can also set this timeout to zero, which will disable automatic logouts; if logins are enabled but automatic logouts are not, users remain logged in until they manually log out with the [Ctrl]-L command—see Section 6.9.

62

Page 62 Page 64
Image 63
Page 62 Page 64
Contents SW741A-R3 SW742A-R3 SW743A-R3 SW761A-R3 SW762A-R3 SW763A-R3 SW741A-R3 SW742A-R3 SW743A-R3 SW761A-R3 SW762A-R3 SW763A-R3 Welcome to the ServSwitchTM FamilyMatrix Servswitch European Union Declaration of Conformity Matrix Servswitch NOM Statement Contents Table of Contents Matrix Servswitch Appendix Hardware SpecificationsMaximum SpecificationsMaximum Altitude Temperature TolerancePower WeightComplete Package IntroductionSecurity FeaturesUpgradability CompatibilityOn-Screen Display Technology FlexibilityFront Panel Front panel of a 2 x 16 Matrix ServSwitch SW743A-R3Right/Green CPU Power Panel Label DescriptionLeft/Red Select Rear Panel Designation Connector DescriptionSee Section KVM 1RS-232 N Equipment Requirements Cable RequirementsQuick Setup Guide Installation and PreconfigurationCpus Installation and Preconfiguration Matrix Servswitch Keyboard mapping by the Matrix ServSwitch Monitor Video quality vs. distance for original Serv cables Video quality vs. distance for coaxial cables Important Note Installation ProcedureRackmounting Optional Connecting Cpus Connecting Other Matrix Servswitches Optional Powering UP the Switches Switching and Accessing the Display from the Keyboard Expansion Module and its input and output ports Daisychaining Matrix ServSwitchesBus topology Ring topology Power-Up Procedure Diagnostic screen Diagnostic Messages Description Ports see SectionSection Configuration Checksum Error Kernel ErrorMain Program Error Sram ErrorKernel is bad, load new kernel through serial port Error reason Hit space bar within 5 seconds to get serial options menu Initial Configuration Initially Configuring Multiple Daisychained Units CPU Ports KVM Full ConfigurationUsing the Menu Saving configuration changes Configure password Configuring the SystemPC keyboard rate PC keyboard delayStarting computer number Maximum computerScreen saver time Sun keyboard language multiplatform models onlyMenu color scheme Screen saverBackground color, text color PositionFadeout Configuring Computers Computer NumberComputer Name Keyboard Bus Configuring User StationsProfile ResolutionKVM Name StartConfiguring User Definitions PasswordUser name Configure Profile Configuring User ProfilesAccess NameConnect Share ScanLogout Configuring Groups Group n where n = 1 throughComputer Group Name Slot PowerStatus ComputersVer UserStatus Logging On-Screen Functions, Same-Port Users, and Connection ModesStatus Control Room Connection-Status MessagesReasons for connection failure Disconnect-status message Reasons for disconnection User Stations Attached to Same-Numbered Ports A 6-user-by-8-computer Matrix ServSwitch/ServShare system Connection Modes Connection dynamics between users Command Summary Keyboard CommandsKeyboard Commands Display CPU List Ctrl Esc Display Configuration Menu Ctrl F12Select Computer Ctrl xxxx Enter Switch to the Next Port in Sequence Ctrl +Switch to the Previous Port in Sequence Ctrl Switch to the Prior Port Ctrl ← or Ctrl BackspaceDisconnect Ctrl Q Reset Ctrl RDisplay User-Station Status Ctrl D Log Out Ctrl LSend Null Byte to PS/2 Type Mouse Ctrl N Reset/Enable Mouse in Windows NT and Unix Ctrl OStart Scan Ctrl S Identify Firmware Revision CtrlEnd Scan Ctrl Pass This Command Through Ctrl X or Ctrl TabBasic Setup Establishing a Serial Connection Using the Serial PortsSerial Options Menu Using the Serial PortsEnter the starting cpu number → Waiting for file Receive failed Try again Y/N Sending flash program code to system Flash programming Option 8. Exit and Restart Unit Common Problems TroubleshootingCharacters that you type come up wrong or missing You can’t switch ports from the keyboardAn IBM compatible computer’s mouse driver doesn’t load You can’t seem to scan or switch to certain ports at allYou can’t access all the functions of your mouse Your PS/2 mouse gets out of syncYour mouse doesn’t move the pointer/cursor Your video is not synchronized or is the wrong color Your monitor display is fuzzyMatrix ServSwitch doesn’t work with your docking station Matrix ServSwitch doesn’t work with your IBM ThinkPadYour on-screen display is not synchronized Shipping and Packaging Calling Black BoxDerived from hardware Appendix a Nvram Factory Defaults100 Appendix B Cable Product Codes 102 103 Appendix C Pinout of Serial Ports Key Pressed on Scan Code LK461 Keyboard Appendix D The LK461 KeyboardSetting the RING/BUS Jumper Jumper JP1 on Expansion Modules Appendix E Installing Modules Matrix ServSwitchSwapping In an Expansion Module Swapping In a Terminator Module Not Recommended Appendix F Rackmounting Matrix ServSwitch Figure F-1. Rackmount assembly Page Page
Related manuals
Manual 4 pages 8.8 Kb Manual 20 pages 59.79 Kb

ServSwitch specifications

The Black Box SRX ServSwitch is an innovative KVM (Keyboard, Video, Mouse) switch that offers robust solutions for managing multiple computers from a single workstation. This device stands out in environments ranging from data centers to broadcasting studios, where efficient control over multiple systems is crucial.

One of the key features of the SRX ServSwitch is its high-resolution video support. It can handle video resolutions up to 4K at 60Hz, ensuring that users can enjoy sharp and clear visuals without lag. This level of performance is essential for professionals who rely on precise graphics for tasks such as video editing and design work.

The SRX ServSwitch employs advanced USB technology, allowing for seamless connectivity with various peripherals. It supports USB 2.0 devices, which means users can connect printers, external drives, and other devices without worrying about compatibility issues. Additionally, the switch allows for USB device sharing, enabling multiple computers to access the same peripherals efficiently.

Security is a significant concern in today’s IT environments, and the Black Box SRX ServSwitch addresses this through its advanced security features. It includes support for secure booting and end-to-end encryption, ensuring that data remains protected when switching between systems. This makes it suitable for environments that handle sensitive information, such as financial institutions or healthcare facilities.

The design of the SRX ServSwitch is another standout characteristic. With its easy-to-use interface, users can quickly switch between connected systems using hotkey commands or the push-button interface. This usability improves productivity since users can manage multiple systems without the hassle of different keyboards and mice.

Furthermore, the SRX ServSwitch is built to be scalable, allowing for the addition of more channels as needed. This flexibility means that organizations can adapt their KVM switch setup as their operational needs grow. It supports both local and remote management, offering organizations the ability to control systems from various locations seamlessly.

The build quality of the Black Box SRX ServSwitch is robust, designed to handle the rigors of continuous use in demanding environments. It is compatible with various operating systems, ensuring that users can integrate it into their existing setups without significant reconfiguration.

In summary, the Black Box SRX ServSwitch offers a comprehensive solution for KVM management, characterized by high-resolution video support, USB compatibility, security features, easy usability, scalability, and durability. It is a valuable investment for organizations seeking an efficient way to manage multiple systems centrally.
Top Page Image Contents