Black Box ServSwitchTM manual Host computer links Audio, Host computer links Virtual Media

Host computer links: Audio

The Wizard IP Plus supports and distributes the stereo sound originated by the host computer to the local console port, and also to the remotely connected users.

To make an audio link

1Connect an audio link cable to the port labelled within the COMPUTER / KVMA SWITCH section of the rear panel.

2A	1	2
	C
	F
		G	K/M

KVMA	DVI
	CONSOLE
	VG
	A

Host computer links: Virtual Media

The Wizard IP Plus provides an ingenious feature that allows authorised remote users to transfer files and folders to a host computer, such that they appear as though presented locally on removable media. In order to use the Virtual Media feature, the VM port at the rear of the Wizard IP Plus must be connected to a standard USB port of a host computer or a switched USB channel of a suitable KVMA switch.

For details about how to use this feature, see Virtual Media.

To make an Virtual Media link

1Connect a USB link cable that has a type B plug (more square than rectangular) to the port marked VM within the COMPUTER / KVMA SWITCH section of the rear panel.

®



VG COMPUTERA / KVMA

	PO
	WER	CONTR
		OL
SW	K/
	M
	ITCH	V
		M

2A	1	2
	C
	F
		G	K/M

KVMA	DVI
	CONSOLE
	VG
	A



DVI

PO

2Connect the plug at the other end of the audio link cable to the speaker / line out socket of the host computer or KVMA switch.

Note: A firmware upgrade is required to enable digital audio via VNC links. Check with Black Box for availability.

VG COMPUTERA / KVMA

WER	CONTR
	OL
K/
M
	V
	M

2Connect the plug at the other end of the USB link cable to a vacant USB socket on the host computer or KVMA switch.

Note: If this connection is being made via a KVMA switch, ensure that the USB port used on the switch is a non-interpreted or switched port, sometimes labelled as ‘Devices’.

 

