Host computer links: Video
The Wizard IP Plus uses DVI/I video ports that support both digital and analogue video monitor connections. The Wizard IP Plus automatically converts between the two connection styles to ensure independence between the locally connected video monitor (at the KVMA CONSOLE port), the remote user’s video monitor and the graphics capabilities of the host computer(s).
To make a video link
1 | Wherever possible, ensure that power is disconnected from the Wizard IP |
| Plus and the host computer (or KVMA switch) to be connected. |
2 | As appropriate, connect either a digital or analogue video link cable to the |
2A | 2 |
|
| C |
|
| F |
|
| G | K/M |
|
|
KVMA | DVI |
| CONSOLE |
| VG |
| A |
®
DVI/I socket on the Wizard IP Plus rear panel: | |
• | Digital Connect a digital video link cable to the port labelled DVI VGA |
| within the COMPUTER / KVMA SWITCH section of the rear panel. |
• | Analogue Connect a converter module to the port labelled DVI VGA |
| within the COMPUTER / KVMA SWITCH section of the rear panel. |
DVI
VG COMPUTERA / KVMA
PO |
|
WER | CONTR |
| |
| OL |
K/ |
|
SWITCH |
|
M |
|
| V |
| M |
Connect an analogue video link cable to the converter module. In both |
cases, ensure that the securing screws are used to maintain reliable links. |
3 Connect the plugs at the other end of the used cable set to the corresponding |
video output socket of the host computer or KVMA switch. |
Digital video link
2A | 1 | 2 |
|
|
| ||
|
|
| |
| C |
| |
| F |
| |
|
| G | K/M |
|
|
| |
KVMA | DVI |
| CONSOLE |
| VG |
| A |
DVI
VG COMPUTERA / KVMA
PO |
|
WER | CONTR |
| |
| OL |
K/ |
|
SWITCH |
|
M |
|
| V |
| M |
Analogue video link