Xerox Phaser 6300, Phaser 6350 manual Long-Edge Feed Short-Edge Feed

Page 67

Printing on Specialty Media

2.Pull out the tray extension, and open the paper guides.

6300-007

3.Insert the paper into Tray 1 (MPT), and adjust the paper guides to fit the paper.

■The paper can be loaded with either the long or short edge entering first, as shown in the illustrations.

■The maximum width (X) is 212.5 mm (8.5 in.).

■For single-sided printing, if you are using preprinted or prepunched paper, place the side to be printed facedown with the top of the paper entering the printer first.

■For 2-sided printing, if you are using preprinted or prepunched paper, place the first side to be printed faceup with the bottom of the page entering the printer first.

X	X
H	H
6300-111	6300-112
Long-Edge Feed	Short-Edge Feed

4.On the control panel, select Change setup, and then press the OK button.

5.Select the paper type, and then press the OK button.

6.Do one of the following:

■If your custom paper size is listed in the menu, select it, and then press the OK button.

■If your custom paper size is not listed in the menu, select New Custom Size, and then press the OK button.

Phaser® 6300/6350 Color Laser Printer

3-40

Image 67

Contents User Guide Page Contents Printing Basics Maintenance User Safety Index Printer Features Front-Right View Printer PartsInside View Rear-Left ViewDoors a and C Open Door B Open Printer Configurations Printer ConfigurationsStandard Features Available ConfigurationsMemory UpgradesOptions Additional TraysControl Panel Control Panel FeaturesControl Panel Layout Information Pages Menu MapSample Pages Resources More InformationInformation Source Centre Xerox Support CentreNetwork Basics Overview of Network Setup and Configuration Network Connection Setting Up the NetworkConnecting via Ethernet Recommended Choosing a Connection MethodStandalone Cable or DSL Network Connection Connecting via USBUSB Connection Automatically Setting the Printer’s IP Address Configuring the Network AddressTCP/IP and IP Addresses Information Comments Dynamic Methods of Setting the Printer’s IP AddressChanging or Modifying the IP Address Using CentreWare is Enabling Dhcp on the PrinterSelect Properties Using Host Names with the Domain Name Service DNSManually Setting the Printer’s IP Address Available Drivers Installing the Printer DriversMacintosh OS Windows 98 SE or Later and Windows 2000 or LaterEtherTalk Macintosh OS X, Version 10.2 and Higher Reference Name Title InfoSMART Knowledge Base Networking Documents English onlyPrinting Basics Overview of Basic Steps Supported Paper and Media Paper That May Damage Your Printer Paper Usage GuidelinesPaper Storage Guidelines Supported Paper Sizes and Weights182 x 257 mm Supported Paper Sizes and Weights for Tray 1 MPT176 x 250 mm Supported Paper Sizes and Weights for Trays Loading Paper in Tray 1 MPT Loading PaperPull out the tray extension, and open the paper guides 6300-008 Macintosh Using Manual FeedLoading Paper in Trays WindowsTo load paper into Trays Pull out the tray 6300-041 MAX If necessary, press the paper guides inward to fit the paper Selecting Printing Preferences Windows Selecting Printing OptionsSelecting Options for an Individual Job Windows Windows Server Window NT Setup tabWindows 98 SE Setup tab or Windows Me Windows XP, orSelecting Options for an Individual Job Macintosh Print Quality Color MatchingAdvanced Options Automatic 2-Sided Printing Guidelines Printing on Both Sides of the PaperSelecting 2-Sided Printing Binding Edge OptionsPortrait Landscape Printing Transparencies Printing on Specialty MediaTransparency Guidelines Printing Transparencies from Tray 1 MPT 6300-050 Printing Transparencies from Trays Insert the transparencies into the tray Envelopes Guidelines Printing EnvelopesPrinting Envelopes from Tray 1 MPT 6300-010 Label Guidelines Printing LabelsPrinting Labels from Tray 1 MPT Pull out the tray extension, and open the paper guides Printing Labels from Trays MAX Glossy Paper Guidelines Printing Glossy PaperPrinting Glossy Paper from Tray 1 MPT Printing Glossy Paper from Trays Fan the paper to release sheets that are stuck together Insert the paper into the tray Printing Custom Size Paper from Tray 1 MPT Printing Custom Size PaperTray 1 MPT Long-Edge Feed Short-Edge Feed Printing on Specialty Media Print Quality Controlling the Quality of Your Prints Selecting a Print-Quality ModeAdjusting Color To select the color correction in a supported driver Lines, Smudges, or Streaks Solving Print-Quality ProblemsProblem SolutionsRepeating Defects SolutionColors Align Incorrectly Fusing Is IncompleteAll Colors Are Too Light or Too Dark Grays Not Neutral Poor Transparency Print QualityColors Vary Between Computers Color Settings Not AppliedPrinted Colors Do Not Match Monitor Colors Colors Do Not MatchPrint Area Is Not Centered on the Paper Pantone Colors Do Not MatchMaintenance Cleaning the Outside of the Printer Cleaning the PrinterCleaning the Density Sensor Use a dry towel or cotton swab to clean the density sensor Close Front Door a Ordering Supplies Routine Maintenance ItemsConsumables Recycling Supplies When to Order SuppliesRequesting a Maintenance Kit Preparing the Printer for Shipment Precautions for Moving the PrinterMoving and Repacking the Printer Moving the Printer Within the OfficeTroubleshooting Preventing Jams Clearing Paper JamsMisfeed at Tray 1 MPT Remove any jammed paper Misfeed at Trays 6300-015 Remove any jammed paper Jam at the Fuser Remove the jammed paper Jam at the Duplex Unit Jam at Registration Roller Remove any jammed paper Control Panel Messages Getting HelpPrintingScout Alerts Web Links PhaserSMART Technical SupportResource Link Electrical Safety User SafetyMaintenance Safety Laser SafetyTotal Height Requirements Operational SafetyMoving the Printer Do not place any food or liquids on the printer Symbols Marked on Product Index Index Phaser 6300/6350 Color Laser Printer Index-3 Phaser 6300/6350 Color Laser Printer Index-4 Phaser 6300/6350 Color Laser Printer Index-5