Xerox 96, 4635, 180 manual Printers

Page 24

PRINTERS

Note: The DocuPrint MICR NPS models utilize the same hardware and operating system as the non-MICR NPS models. However, the Image Development systems have been modified to enable MICR font reproduction.

Processor feeder trays Two processor feeder trays are located in the main part of the printer:

•

•

The main tray (tray 1) holds up to 1100 sheets of 20 pound or 80 gsm (grams per square meter) paper.

The auxiliary tray (tray 2) holds up to 600 sheets of 20 pound or 80 gsm paper.

Each tray can handle paper from 8 x 10 inches/203 x 254 mm to 9.02 x 14.33 inches/230 x 364 mm.

7x10 inch (178x254mm) enablement The optional 7 x 10 inch enablement feature allows your DocuPrint 4635 NPS and 180 NPS to print on paper sized from 7 x 10 inches/ 178 x 254 mm to 9.02 x 14.33 inches/230 x 364 mm.

Note: The 7 x 10 inch enablement feature is not available on the

DocuPrint 96 NPS.

Inverter The inverter is part of the inverter feeder/stacker module. It allows for proper collation of the print job. It directs printed output to the sample tray, when required. It also directs output to optional third-party finishing devices in the proper orientation.

High-capacity feeder There is a high-capacity feeder (HCF) tray located in the bottom half of each feeder/stacker module (trays 3, 4, 5 and 6, depending on the number of feeder/stacker modules installed).

Each HCF tray can hold up to 2600 sheets of 20 pound or 80 gsm paper.

Note: When configured, each HCF tray can handle paper sized from 7 x 10 inches/178 x 254 mm to 17 x 14.33 inches/432 x 364 mm. To feed papers smaller than 8 inches/203.2 mm, an optional 7 x 10 inch enablement kit must be installed. 17-inch/432 mm paper can be fed only short edge first.

An elevator moves the tray up or down when it is in use. The HCF trays have Paper Level switches which detect the position of the elevator to determine the fullness of the tray. Paper Size switches detect the size of the paper loaded in the trays.

High-capacity stacker The 4635 NPS and 180 NPS printers can contain up to four high- capacity stacker (HCS) bins as part of the feeder/stacker modules (stacker bins A, B, C and D). The 96 NPS printer can contain up to two high-capacity stacker (HCS) bins as part of the feeder/stacker modules (stacker bins A and B).

3-2	XEROX DOCUPRINT 96/4635/180 NPS SYSTEM OVERVIEW GUIDE

Image 24

Contents Version 7.1 August 2000 721P86632 Page Laser safety Operation safetyOzone information Xerox Docuprint 96/4635/180 NPS System Overview Guide Table of contents Paper and other supplies Paper performance guidelines IndexContents IntroductionAbout this guide Conventions Related publications DocuPrint NPS Interactive Customer Documentation CDPage System overview Functional overview of the DocuPrint NPSSystem Overview DocuPrint Dual Mode Client workstations and system software Supported hardware and operating systemsClient software Ethernet LAN Fddi Backbone LANToken Ring Multiple network connectivity Printer Controller Printer Controller overviewPrinter Controller components Cartridge tape driveProcessor CPU Printer Controller software and fonts External ModemCartridge tape drive optional Adobe Type 1 PostScript fonts Font TypefaceIntellifont scalable Typeface TrueType scalable TypefaceBitmap Typeface Printers DocuPrint NPS model 96, 4635, and 180 printer componentsPrinters High capacity stackers Language icon Printer icon Fault List icon Tools icon Clear button Continue button Stop buttonPrinters Printer configurations Printer + Inverter Feeder Stacker + Feeder Stacker Page Optional printer components Bypass transportInput enablement device Client workstations WorkstationsSubmitting print jobs Communicating with the network DocuPrint NPS clientsClient Protocol Workstation Operating Ethernet Hardware System ConnectionJob status feedback DocuPrint job status feedbackPlatform Job status capability Client Workstations Paper and other supplies Paper and other throughput stocksSelecting paper Paper and Other Supplies Paper width and printer performance Perforated paper Pre-cut or full tabs Carbonless paperThroughput data 96 printer Pitch Paper width Speed Throughput data 4635 printer Pitch Paper width SpeedUsing small paper sizes in 8-pitch mode Throughput data 180 printer Pitch Paper width SpeedPaper and Other Supplies European papers Figure A-3.A4 210 by 297 mm paper feeding long edge feedPaper and Other Supplies B4 Papers Figure A-7.B4 250 by 353 mm paper feeding long edge feedPaper care Figure A-9.Storing paper correctlyPaper and Other Supplies Centigrade Cartons HoursOther supplies Dry inkFuser agent DeveloperDiskettes Cartridge tapesFonts Micr Positioning and Dimension Gauge Micr toolsMicr comparator Consumable supplies tables Paper and special stocks tablesPaper and Other Supplies Table A-5.Stocks list for 96/4635/180 printers Description Part numberLabels Gummed Tab stockStraight collated singles forward, top down Reverse collated singles bottom upPaper and Other Supplies Paper and Other Supplies Complete supplies list-96/4635/180 printers Ordering supplies Paper and Other Supplies Paper and Other Supplies Paper performance guidelines Trays 1 and 2 performance guidePerformance limits Trays 3, 4, 5 and 6 or high capacity trays Two-sided duplex printing performance guide Table B-4.Paper stocks guide Stock type Instructions for useTable B-4. Paper stocks guide Stacker bin performance guide Index NumericsLAN Index