Xerox 180 Job status feedback, DocuPrint job status feedback, Platform Job status capability

Page 35

					CLIENT WORKSTATIONS
			Table 5-1.	DocuPrint NPS clients

	Client			Protocol;
	workstation	Operating	Ethernet	Translation
	hardware	system	connection	requirements	Job submission method

	Digital	ULTRIX	Optional	TCP/IP;	Print directly from application,
	Equipment		Ethernet	none	or use the lpr command or
	Corporation		interface		Xerox Client Software.
	DECstation

	Apple	Apple OS	Optional	AppleTalk using	Print directly from application or
	Macintosh		Ethernet	EtherTalk Phase I or	use Xerox DocuPrint Print
			interface	II; none	Submission Client software for
					the Macintosh.

	IBM RS/6000	IBM AIX	Standard	TCP/IP;	Print using Xerox Client
				none	Software.

	HP/Apollo	HP-UX	Standard	TCP/IP;	Print using Xerox Client
				none	Software.

Job status feedback

	Client workstations display fault messages and additional
	information, such as the status of feeder trays and output bins. If
	properly configured, the workstations may be able to display job
	status, as shown below.
	Table 5-2.DocuPrint job status feedback

Platform	Job status capability

Sun Workstation	Job status and job deletion are available by issuing the appropriate
	command at the command line.
	Job status information is available for jobs submitted using Xerox
	Client Software.

IBM and compatible	Job status and job deletion are available depending on the TCP/IP
personal computers	software installed on the workstation. You must issue the appropriate
	command at the command line.
	Job status information is available for jobs submitted using Xerox
	Client Software.
	Job status information is available using the Novell PCONSOLE
	utility if DocuPrint is configured with a RPRINTER or PSERVER
	implementation.

Apple Macintosh	Job status information is available at the workstation through
	AppleTalk.

IBM RS/6000 and HP/	Job status information is available for jobs submitted using Xerox
Apollo	Client Software or Ipstat (native utility).

To determine the status of jobs submitted using the lpr command, you must issue an lpq command at the command line. Some application software packages may provide a simplified means of obtaining job status, perhaps using icons.

XEROX DOCUPRINT 96/4635/180 NPS SYSTEM OVERVIEW GUIDE

5-3

Image 35

Contents Version 7.1 August 2000 721P86632 Page Ozone information Laser safetyOperation safety Xerox Docuprint 96/4635/180 NPS System Overview Guide Table of contents Paper performance guidelines Index Paper and other suppliesAbout this guide ContentsIntroduction Conventions DocuPrint NPS Interactive Customer Documentation CD Related publicationsPage Functional overview of the DocuPrint NPS System overviewSystem Overview DocuPrint Dual Mode Client software Client workstations and system softwareSupported hardware and operating systems Token Ring Ethernet LANFddi Backbone LAN Multiple network connectivity Printer Controller overview Printer ControllerCartridge tape drive Printer Controller componentsProcessor CPU Cartridge tape drive optional Printer Controller software and fontsExternal Modem Font Typeface Adobe Type 1 PostScript fontsBitmap Typeface Intellifont scalable TypefaceTrueType scalable Typeface DocuPrint NPS model 96, 4635, and 180 printer components PrintersPrinters High capacity stackers Clear button Continue button Stop button Language icon Printer icon Fault List icon Tools iconPrinters Printer configurations Printer + Inverter Feeder Stacker + Feeder Stacker Page Bypass transport Optional printer componentsInput enablement device Submitting print jobs Client workstationsWorkstations Hardware System Connection Communicating with the networkDocuPrint NPS clients Client Protocol Workstation Operating EthernetPlatform Job status capability Job status feedbackDocuPrint job status feedback Client Workstations Selecting paper Paper and other suppliesPaper and other throughput stocks Paper and Other Supplies Throughput data 4635 printer Pitch Paper width Speed Paper width and printer performancePerforated paper Pre-cut or full tabs Carbonless paper Throughput data 96 printer Pitch Paper width SpeedThroughput data 180 printer Pitch Paper width Speed Using small paper sizes in 8-pitch modePaper and Other Supplies Figure A-3.A4 210 by 297 mm paper feeding long edge feed European papersPaper and Other Supplies Figure A-7.B4 250 by 353 mm paper feeding long edge feed B4 PapersFigure A-9.Storing paper correctly Paper carePaper and Other Supplies Cartons Hours CentigradeDeveloper Other suppliesDry ink Fuser agentFonts DiskettesCartridge tapes Micr comparator Micr Positioning and Dimension GaugeMicr tools Paper and special stocks tables Consumable supplies tablesPaper and Other Supplies Description Part number Table A-5.Stocks list for 96/4635/180 printersReverse collated singles bottom up Labels GummedTab stock Straight collated singles forward, top downPaper and Other Supplies Paper and Other Supplies Complete supplies list-96/4635/180 printers Ordering supplies Paper and Other Supplies Paper and Other Supplies Performance limits Paper performance guidelinesTrays 1 and 2 performance guide Trays 3, 4, 5 and 6 or high capacity trays Two-sided duplex printing performance guide Stock type Instructions for use Table B-4.Paper stocks guideTable B-4. Paper stocks guide Stacker bin performance guide Numerics IndexLAN Index