PRINTERS
either check the Printer Controller for messages concerning the maintenance task or touch the Guarded Tools icon to display the Guarded Tools screen. If you are not an ACT/eXcellerate trained operator, notify your lead operator or an ACT/ eXcellerate trained operator at your site.
12.Message area
The message area is used as follows:
•Lines 1 and 2. These lines display the current status of the printer, for example, READY.
•Line 3. This line displays messages concerning masked conditions, such as low dry ink. These messages are preceded by an asterisk.
•Line 4. This line displays messages that originate at the Printer Controller.
Printer configurations
The DocuPrint 96 NPS base system is configured with one inverter feeder/stacker module; one additional feeder/stacker module is optional. Input enablement and bypass transport devices can also be used.
Note: The input enablement and bypass transport devices are offered as optional components. These options allow you to customize your printer for increased efficiency and specialized applications, such as roll feed and finishing devices. The middle feeder/stackers are also optional for the 4635 and 180 NPS.
Figure | DP 96 NPS: Printer + Inverter Feeder Stacker |
The DocuPrint 4635 and 180 are available in the configurations shown in the following figures.
XEROX DOCUPRINT 96/4635/180 NPS SYSTEM OVERVIEW GUIDE |