| PAPER PERFORMANCE GUIDELINES |
| Table |
|
|
Stock type | Instructions for use |
|
|
Tab stock | • Load into trays 1 and 2 with tabs to the LEFT. |
| • For best performance, print should be centered on the tab and should not |
| extend to either edge. |
| • Use tab stock in perfectly flat condition. DO NOT use deformed, bent, or |
| damaged tabs. |
|
|
Load into any tray. | |
110 pound/200 gsm |
|
|
|
• Load FACE UP. | |
| • DO NOT run |
|
|
Letterhead | • Load into trays with side 1 UP and top edge toward the front of the tray |
| (avoid placing the print in line with the feed belt in trays 1 and 2). |
| • Avoid using freshly preprinted paper. |
|
|
Manual | • Load into trays with printed side DOWN and top edge toward the front of the |
prints | tray (avoid placing the print in line with the feed belt in trays 1 and 2). |
| • Print the second side as soon as possible after the first side to prevent |
| wrinkling and excessive curl. |
|
|
Textured paper | Heavily textured paper may yield prints with ragged character appearance and/ |
| or deletions. To test, print a sample sheet. |
|
|
1.You can order a mylar reinforcement tray which allows a feeder tray to handle up to 500 sheets of this type of stock. Contact your service representative for additional information.
XEROX DOCUPRINT 96/4635/180 NPS SYSTEM OVERVIEW GUIDE |