Xerox 96, 4635, 180 manual Printers

Page 27

PRINTERS

9Sample button

10Brightness control thumbwheel

11Icon area

12Message area

1.Language icon

If two languages are available for your printer control console, selecting this icon allows you to choose the language for the printer control console messages.

2.Printer icon

Select this icon to display the printer mimic. (This is the default display on the printer control console.)

3.Fault List icon

Select this icon to display the Fault List screen. All active faults will be listed in order of occurrence.

4.Tools icon

Select this icon to display call for service information and to adjust display features of the printer control console (for example, alarm loudness).

5.Guarded Tools icon

This icon is reserved for the service representative and operators who have completed Advanced Customer Training (ACT/eXcellerate).

6.Clear button

Select this button to clear fault messages.

7.Continue button

Press this button to resume printing.

8.Stop button

Press this button to stop printing.

9.Sample button

The Sample button on the 180, 4635, or 96 printer will duplicate one of the sheets in the paper path and deliver it to the sample tray. This sheet can be used to check quality and alignment while printing. The button is disabled for MICR models.

10.Brightness control thumbwheel

Use this thumbwheel to adjust the brightness of the printer control console display.

11.Icons

Area where the following icons appear:

Fault icon. This icon appears when a fault exists in the system that stops the printer or prevents it from printing.

Hint icon. This icon appears when a masked fault or condition exists in the printer. See “Fault masking and the printer control console” in the Guide to Troubleshooting.

ACT/eXcellerate icon. This icon appears when a maintenance task requiring an ACT/eXcellerate trained operator must be done. If you have successfully completed ACT/eXcellerate,

XEROX DOCUPRINT 96/4635/180 NPS SYSTEM OVERVIEW GUIDE

3-5

Image 27

Contents Version 7.1 August 2000 721P86632 Page Laser safety Operation safetyOzone information Xerox Docuprint 96/4635/180 NPS System Overview Guide Table of contents Paper performance guidelines Index Paper and other suppliesContents IntroductionAbout this guide Conventions DocuPrint NPS Interactive Customer Documentation CD Related publicationsPage Functional overview of the DocuPrint NPS System overviewSystem Overview DocuPrint Dual Mode Client workstations and system software Supported hardware and operating systemsClient software Ethernet LAN Fddi Backbone LANToken Ring Multiple network connectivity Printer Controller overview Printer ControllerCartridge tape drive Printer Controller componentsProcessor CPU Printer Controller software and fonts External ModemCartridge tape drive optional Font Typeface Adobe Type 1 PostScript fontsIntellifont scalable Typeface TrueType scalable TypefaceBitmap Typeface DocuPrint NPS model 96, 4635, and 180 printer components PrintersPrinters High capacity stackers Clear button Continue button Stop button Language icon Printer icon Fault List icon Tools iconPrinters Printer configurations Printer + Inverter Feeder Stacker + Feeder Stacker Page Bypass transport Optional printer componentsInput enablement device Client workstations WorkstationsSubmitting print jobs Hardware System Connection Communicating with the networkDocuPrint NPS clients Client Protocol Workstation Operating EthernetJob status feedback DocuPrint job status feedbackPlatform Job status capability Client Workstations Paper and other supplies Paper and other throughput stocksSelecting paper Paper and Other Supplies Throughput data 4635 printer Pitch Paper width Speed Paper width and printer performancePerforated paper Pre-cut or full tabs Carbonless paper Throughput data 96 printer Pitch Paper width SpeedThroughput data 180 printer Pitch Paper width Speed Using small paper sizes in 8-pitch modePaper and Other Supplies Figure A-3.A4 210 by 297 mm paper feeding long edge feed European papersPaper and Other Supplies Figure A-7.B4 250 by 353 mm paper feeding long edge feed B4 PapersFigure A-9.Storing paper correctly Paper carePaper and Other Supplies Cartons Hours CentigradeDeveloper Other suppliesDry ink Fuser agentDiskettes Cartridge tapesFonts Micr Positioning and Dimension Gauge Micr toolsMicr comparator Paper and special stocks tables Consumable supplies tablesPaper and Other Supplies Description Part number Table A-5.Stocks list for 96/4635/180 printersReverse collated singles bottom up Labels GummedTab stock Straight collated singles forward, top downPaper and Other Supplies Paper and Other Supplies Complete supplies list-96/4635/180 printers Ordering supplies Paper and Other Supplies Paper and Other Supplies Paper performance guidelines Trays 1 and 2 performance guidePerformance limits Trays 3, 4, 5 and 6 or high capacity trays Two-sided duplex printing performance guide Stock type Instructions for use Table B-4.Paper stocks guideTable B-4. Paper stocks guide Stacker bin performance guide Numerics IndexLAN Index