Xerox 5000 manual NVM Read/Write, Drilled Papers

2. System Settings

NVM Read/Write

Your Xerox service representative uses this feature to change certain system settings. It also may occasionally be used by system administrators.

	Under most conditions, this feature is not used by system
	administrators; however, there are limited circumstances under
	which this feature is used. These circumstances include:
Special Media Setting for	If you use 3-hole, predrilled paper on a regular basis and
Drilled Papers	continually encounter an inordinate amount of paper jams, and/or
Special Media Setting for	If you regularly run tab stock and continually encounter paper
LEF Tab Stock	jams.
Carbonless Media	• Carbonless papers are coated with several functional coatings
Enablement	which promote the image transfer through the form set and
	enable the form sets to separate appropriately after padding
	with a special adhesive. Each supplier of xerographic
	carbonless paper has developed their own unique chemistry,
	which is why the following procedure enabling this application,
	works best with Xerox Premium Digital Carbonless Paper.
	• In order to avoid problems when running carbonless media,
	you may use the NVM Read/Write feature to switch on the
	carbonless media feature.
	If any of the above conditions exist in your environment, you may
	use the NVM Read/Write feature to switch on a feature.
	CAUTION: Do not enter any numbers on this screen other than
	the ones described in this procedure. Entering and saving
	numbers, other than the ones described, changes the system
	settings which may result in a service call to restore the system to
	the correct settings.

DocuColor 5000 Administrator Guide 2-19