Xerox 5000 manual System Settings

Page 56

2. System Settings

If you adjust the blowers on the tray to accommodate a particular type of paper (for example, thin or thick), you want to make adjustments on the Tray Options window from the Administrator mode. This will provide optimal output quality of your prints. To make these adjustments, use the following procedure:

1. From the System Setting window, select the Tray Options tab.

2. Select either the desired tray.

3. From the pull-down menu, select the option which best

correlates with the selected paper for that tray and the adjustments made to the tray air adjustment levers.

The options include the following:

•System Default: This option is the default setting. With this option the paper tray blowers automatically adjust using settings that are optimized for Xerox papers.

•Multi-Sheet Feed: Select this option if you want the paper tray blower automatic settings to incrementally adjust in order to reduce multifeeds.

•Mis-feed: Select this option if you want the paper tray blower automatic settings to incrementally adjust in order to reduce misfeeds.

•Custom: With this option, the paper tray blowers are controlled by parameters that are set by your Service Representative.

•Always Off: Select this option if you want the paper tray blowers always switched off; in this mode, the blowers are not automatically controlled. This mode is reserved for special media.

2-26	DocuColor 5000 Administrator Guide

Image 56

Contents Administrator Page Table of contents Administrator overview Profiles Table of contents DocuColor 5000 Administrator Guide Symbols ConventionsConventions Safety notices Electrical safetySafety notices Disconnect device Laser safety North AmericaEurope EU Safety standards Maintenance safetyOperational safety Ozone safety Radio frequency emissions FCC in the USARegulatory information for Rfid Safety extra low voltage approvalCanada ICES-003 Certifications in Europe AL7 1HEIt’s illegal in the USA DocuColor 5000 Administrator Guide Xix It’s illegal in Canada Environmental notices for Canada Product recycling and disposal European union Other countriesXxiv DocuColor 5000 Administrator Guide Logging on as Administrator OverviewAdministrator overview Finishing System Profiles overview Administrator overview DocuColor 5000 Administrator Guide System Settings User Interface Fault Details window System Settings Change Password System Settings System Settings Setting the Date & Time System Productivity Setting Productivity charts Single Paper WeightMixed Paper Weight Power Saver Exit Power Saver Auto Resume AfterFault Clearance Pause Job Spacing Auto Logoff NVM Read/Write Drilled PapersSystem Settings System Settings System Settings Choose the default settings for the following options Tray OptionsSystem Settings Paper Tray Assist System Settings System Settings Tray Priority Profiles Alignment Profiles Alignment Adjustment Profile procedure Next Creating an Alignment profile Creating an Alignment profile Selecting the Registration options Selecting the Perpendicularity options Selecting the Skew options Selecting the Magnification options Running test prints Next Editing an existing Alignment profile Editing an existing Alignment profile Custom Paper Custom Paper procedure Creating an Custom Paper profile Selecting the desired paper type Selecting the desired paper weight Selecting other options for your Custom Paper profile Profiles Profiles Profiles Next Running test prints Running test prints Editing a Custom Paper profile Second Bias Transfer Belt No Mottle Profiles Profiles Aligner Roll Pressure Paper Tray Air Assist Decurler OverviewDecurler specifications Decurler settings A-D Decurler A-D procedure Evaluate your print output for paper curl Upward DownwardProfiles Decurler Profile options Name Downward/Upward Values ExampleProfiles Decurler Profile procedure Profiles Profiles Profiles Profiles Profiles Profiles DocuColor 5000 Administrator Guide