Xerox 701P46740 manual Security Guide

NOTE: During steps 2-5, the user may go back and correct any mistakes made in previous steps.

–Click on the 'Enable SSL/TLS' checkbox at the top of the SSL/ TLS window.

–Select a SSL/TLS mode of operation:

•Normal (Encrypted and Unencrypted Access)

•Secure (Encrypted Access Only)

–Select encryption strength:

•Normal (DES-MD5-56-bit)

•Normal (DES-MD5-40-bit)

•Normal (DES-MD5-128-bit)

•Normal (3DES-MD5-128bit)

•High (RC4-MD5-128-bit)

•High (3DES-MD5-128-bit)

Using an Existing Signed Certificate from a Certificate Authority

–If SSL/TLS is not already enabled

–Click 'Add Certificate'

Step 1 - Select "Signed Certificate from a Certificate Authority" Step 2 - Select and enter either the server

•Domain Name

•IP Address

•Other

Step 3 - Enter the requested information:

•Organization (required)

•Organizational Unit (optional)

•E-mail (optional)

•Locality (optional)

•State/Province (optional)

•Country (required)

Step 4 - Browse to the location of the signed certificate (.pem file).

Step 5 - Verify information entered in previous steps.

Step 6 - A message will appear indicating that the certificate has been installed.

NOTE: During steps 2-5, the user may go back and correct any mistakes made in previous steps.

26 Security Guide