Xerox FS 5250 IPC instruction manual Non-IPDS as primary emulation, Ipds as primary emulation

Page 19

Connections and Installation

Xerox FS 5250, User’s Guide

NOTE:

The device address (n2) must be different from the address switch setting or this command will only modify the primary printer emulation without creating a secondary.

One non-IPDS and one IPDS emulation can be defined.

The secondary printer device will be deleted if you attempt to configure two similar devices (e.g. two non-IPDS devices) or if Y37 is used without specifying n2.

For this change to become effective, you must turn power to the converter off for approx. 10 seconds and then back on.

Non-IPDS as primary emulation

If the primary printer emulation (set via the address switch) is set to non- IPDS, you can set the second emulation via the twinax port activating Y37.

E.g.

Primary emulation: non-IPDS (set via address switch)

Second emulation: %Y37,*IPDS,6%%X1

You have now a non-IPDS primary emulation, and a second IPDS emulation answering on device address 6.

As an alternative setup, you can also use the Centronics port activating function Y249, Enter Engineering Mode.

E.g.:
Primary emulation:	non-IPDS (set via address switch)
Second emulation:	2)
Second emulation:	%Y249, password%
	%Y37,*IPDS,5%%X1

IPDS as primary emulation

If the primary emulation is set to IPDS (set via the address switch) the only way to set a second emulation is through the Centronics port enabling function Y249, Enter Engineering Mode. You must still set function Y37 to the desired emulation.

E.g.

Primary emulation: IPDS (set via address switch)

Second emulation: %Y249,password% %Y37,3812,1%%X1

2As the password is sensitive information, please contact point of purchase for details

- 19 -

Image 19

Contents Trademarks EMC directiveSafety Notice Table of Contents PCL Appendix a Supported Setup Functions PC Support Virtual Printer Error MessagesProgramming via Shareport Introduction to the Xerox FS What is the Xerox FS 5250?Printer Driver Selection XES mode selection handles Xdpm and Xppm data streams Items Supplied IPC Upgrade KitNon-IPC Product FeaturesIf equipped with the optional IPC module Supported Control Units Via the Line Installation RequirementsPre-Installation Requirements National LanguageWorking Environment EU or US SettingsRear Panel Connections and Installation of the Xerox FS= PCL, B = XES Twinax Connector Selecting emulation via the line can be done inPCL only EmulationChanging the Driver Via the LineY37,n1 Write Emulation Via the Address Switch%Y37,5224% Non-IPDS Y37,n1 Write EmulationNon-IPDS Selection Emulation Current emulation isSelection Emulation Via the address switch Address SettingDual Printer Emulation PCL only Ipds as primary emulation Non-IPDS as primary emulationUpgrading to Ipds Connecting via Centronics output Connecting the Xerox FS 5250to the PrinterWhat if the CU Indicator fails to turn on? Connecting the Xerox FS 5250to the SystemTest Function Test via the address switchTimeout PAR Parallel input Operation of the Xerox FSTop Panel of the Xerox FS 1 CUReady Printer Ready SER Serial input/outputState Indication Syntax of an FSL Function Function Selection via the LineYfunction number,parameters% Escape Character ??blank Defining a Temporary Escape CharacterRemoving Temporary Escape Character ??%Removing Permanent Escape Character Defining a Permanent Escape CharacterY48,00 ??% ??% %X3 Commands for Storing and Restoring SettingsCommand Description Example ??% %X1%%1B% Pass-Through ModePCL only %1BPass-through mode XES For details refer to the programmers guide, doc. D62081 Transparency Mode LimitationsIdaSetup Ipds Programming Programming the Xerox FS 5250 Non-IPDS Changing paper size Selected FSL FunctionsPaper Size TraysValue Paper Size ??% %Y12,n1,n2% &&??spaceValue Paper Tray Changing paper size example Saving the commandOther commands This command also erases the escape characterBasic printer set-up Paper TraysChanging paper trays Function Y10 Page Format Value n1 Format CharacteristicsFormat Formats??% %Y10,n1,n2% &&??space Changing Page FormatValue n2 Tray ??% %Y10,2,3% %X1 Changing page format exampleExample Y98, 0,3% Automatic Page OrientationFunction Y98 Automatic Page Orientation Y98 Syntax Y98,n1,n2%Automatic Page Orientation Automatic Page Orientation ChartY98 Enabled factory default Explanation to the chart on Automatic Page OrientationSystem /36 OCL Text -YES Y98 DisabledFonts Selecting Fonts PCL??% %Y96,n1% &&??space Changing fontSymbol SET and Translate Default Gfid TableGfid Only applies to printers running PCL Level Scaleable FontsTypeface ID PCL No Name of Typeface Defining Fonts PCL Style StrokeweightValue Symbol set Symbol set of the fontWhat you need to know Proportional spacing, bold This is HelveticaItalic Selected FSL Functions Xerox FS 5250, User’s Guide ValueTypeface Typeface of the font Value Typeface??% %Y91,521,6,5,1,18,1% %X1 Other commandsSelecting Fonts XES Font definition exampleChanging font example This function cannot be saved in the permanent memory??% %Y96,41% &&?? Font definition Defining Fonts XESFont strings sent Orientation XES GfidGfid Gfid CPI / Gfid Relation Optional ScalingCOR CPI / Gfid Relation Font definition example System or interface? Duplex PrintingWhat to consider ??% X4 &&?? Binding option??% Y19,0% &&?? Orientation Setting DescriptionYou cannot save the duplex command in the permanent memory Selecting duplex printing??% %Y19,2% %Y96,nn% &&?? Duplex selection example, PCL??% %Y19,2% %Y10,1,3% &&?? Duplex selection example, XESXdpm ISO Xdpm Ebcdic Xppm Ebcdic Xppm Ascii Output DataY70 Y36 Data Stream Translation Mode Function Settings OutputFunction 100 Port Share Option Port Share Option??character Y100 = Y100,timeout,user string%Y100 Example ??%%Y100,20,1B,45%%X1 Sending the commands from the system??% %Y100,35,1BzlH%%X1 Sending the commands from the PCPrinter sharing example ??% %Y100,30,1B 45 1B 28 32 53%Activating the Y249 Engineering Function Programming via ShareportEscape sequences must be in HEX Limitations when Y249 is activeDeactivating the Y249 Engineering Function Updating firmwarePC Support Virtual Printer Recoverable Errors Error MessagesMultistrike String is TOO Long Code Error Type Code Description Non-Recoverable Hardware ErrorsXES Mode Appendix a Supported Setup FunctionsDescription No. Description ESC Transparency FeaturesPCL Mode ESC Features Quick Reference Guideto the Supported FSL Functions Default depends N1 Physical paper Name Syntax Parameters Ly write PCL String Translate Table Ebcdic Name Syntax Parameters IBM Gfid APO Name Syntax Parameters Deviation Nvram Appendix B Test Printout 101 Appendix C Use of Xerox FS 5250 Serial Port Out Laser 5250, Programmers Guide Document no. D62081 Appendix D Related ManualsIPDS, Programmer’s Guide Document no. D60253 Lead-in/lead-out sequences Index