Xerox FS 5250 IPC instruction manual Upgrading to Ipds

Page 20

Connections and Installation

Xerox FS 5250, User’s Guide

With IPDS as primary emulation, you have now selected 3812 as second emulation to answer on address 1.

NOTE:

If you wish to define 2 emulations, you are recommended to set the primary emulation to non-IPDS.

6.3. Upgrading to IPDS

If you need to upgrade your Xerox FS 5250 with the IPC module, please follow these instruction before proceeding with the installation.

1.Unscrew the 4 screws from the bottom of the converter.

2.Place you hands on each side of the box, bottom facing down and the rear panel facing you. Carefully press open the top cover of the converter.

3.Place the IPC module (main component side facing up) on the PCB of the box. Note that the connector has to be placed on top of the PCB’s connector (to the right on the PCB).

4.Make sure the plastic supports fit in the holes of the IPC module.

5.Press the module gently into position and, while still facing the rear panel, place the top cover precisely above the bottom cover so that all edges are aligned. Press the top cover gently into a locked position.

6.Re-insert the screws and fasten.

7.Now proceed to the actual installation of the converter to the printer and the system.

- 20 -

Image 20

Contents EMC directive TrademarksSafety Notice Table of Contents PCL Programming via Shareport PC Support Virtual Printer Error MessagesAppendix a Supported Setup Functions Printer Driver Selection What is the Xerox FS 5250?Introduction to the Xerox FS XES mode selection handles Xdpm and Xppm data streams IPC Upgrade Kit Items SuppliedIf equipped with the optional IPC module Product FeaturesNon-IPC Supported Control Units Installation Requirements Pre-Installation RequirementsNational Language Via the LineEU or US Settings Working Environment= PCL, B = XES Connections and Installation of the Xerox FSRear Panel Twinax Connector Emulation Changing the DriverVia the Line Selecting emulation via the line can be done inPCL onlyVia the Address Switch %Y37,5224%Non-IPDS Y37,n1 Write Emulation Y37,n1 Write EmulationSelection Emulation Current emulation isNon-IPDS Selection Emulation Dual Printer Emulation PCL only Address SettingVia the address switch Non-IPDS as primary emulation Ipds as primary emulationUpgrading to Ipds Connecting the Xerox FS 5250to the Printer Connecting via Centronics outputConnecting the Xerox FS 5250to the System What if the CU Indicator fails to turn on?Test via the address switch Test FunctionTimeout Operation of the Xerox FS Top Panel of the Xerox FS1 CU PAR Parallel inputState Indication SER Serial input/outputReady Printer Ready Yfunction number,parameters% Function Selection via the LineSyntax of an FSL Function Escape Character Defining a Temporary Escape Character Removing Temporary Escape Character??% ??blankDefining a Permanent Escape Character Removing Permanent Escape CharacterY48,00 ??% Commands for Storing and Restoring Settings Command Description Example??% %X1 ??% %X3Pass-Through Mode PCL only%1B %%1B%Pass-through mode XES Transparency Mode Limitations For details refer to the programmers guide, doc. D62081IdaSetup Ipds Programming Programming the Xerox FS 5250 Non-IPDS Selected FSL Functions Paper SizeTrays Changing paper sizeValue Paper Tray ??% %Y12,n1,n2% &&??spaceValue Paper Size Saving the command Other commandsThis command also erases the escape character Changing paper size exampleChanging paper trays Paper TraysBasic printer set-up Value n1 Format Characteristics FormatFormats Function Y10 Page FormatValue n2 Tray Changing Page Format??% %Y10,n1,n2% &&??space Changing page format example ??% %Y10,2,3% %X1Automatic Page Orientation Function Y98 Automatic Page OrientationY98 Syntax Y98,n1,n2% Example Y98, 0,3%Automatic Page Orientation Chart Automatic Page OrientationExplanation to the chart on Automatic Page Orientation Y98 Enabled factory defaultY98 Disabled FontsSelecting Fonts PCL System /36 OCL Text -YESChanging font ??% %Y96,n1% &&??spaceDefault Gfid Table Symbol SET and TranslateGfid Typeface ID PCL No Name of Typeface Scaleable FontsOnly applies to printers running PCL Level Style Strokeweight Defining Fonts PCLWhat you need to know Symbol set of the fontValue Symbol set Italic This is HelveticaProportional spacing, bold Selected FSL Functions Xerox FS 5250, User’s Guide Typeface of the font Value Typeface ValueTypefaceOther commands Selecting Fonts XESFont definition example ??% %Y91,521,6,5,1,18,1% %X1??% %Y96,41% &&?? This function cannot be saved in the permanent memoryChanging font example Defining Fonts XES Font definitionXES Gfid Font strings sent OrientationGfid Gfid COR CPI / Gfid Relation Optional ScalingCPI / Gfid Relation Font definition example What to consider Duplex PrintingSystem or interface? ??% Y19,0% &&?? Binding option??% X4 &&?? Setting Description You cannot save the duplex command in the permanent memorySelecting duplex printing OrientationDuplex selection example, PCL ??% %Y19,2% %Y10,1,3% &&??Duplex selection example, XES ??% %Y19,2% %Y96,nn% &&??Output Data Xdpm ISO Xdpm Ebcdic Xppm Ebcdic Xppm AsciiData Stream Translation Mode Function Settings Output Y70 Y36??character Port Share OptionFunction 100 Port Share Option Y100 Y100,timeout,user string%Y100 = Sending the commands from the system Example ??%%Y100,20,1B,45%%X1Sending the commands from the PC Printer sharing example??% %Y100,30,1B 45 1B 28 32 53% ??% %Y100,35,1BzlH%%X1Programming via Shareport Activating the Y249 Engineering FunctionLimitations when Y249 is active Deactivating the Y249 Engineering FunctionUpdating firmware Escape sequences must be in HEXPC Support Virtual Printer Error Messages Recoverable ErrorsMultistrike String is TOO Long Non-Recoverable Hardware Errors Code Error Type Code DescriptionDescription Appendix a Supported Setup FunctionsXES Mode ESC Transparency Features No. DescriptionPCL Mode ESC Features Quick Reference Guideto the Supported FSL Functions Default depends N1 Physical paper Name Syntax Parameters Ly write PCL String Translate Table Ebcdic Name Syntax Parameters IBM Gfid APO Name Syntax Parameters Deviation Nvram Appendix B Test Printout 101 Appendix C Use of Xerox FS 5250 Serial Port Out IPDS, Programmer’s Guide Document no. D60253 Appendix D Related ManualsLaser 5250, Programmers Guide Document no. D62081 Index Lead-in/lead-out sequences