Xerox FS 5250 Selecting duplex printing, Orientation, Setting Description, ??% %Y19,n1% &&??space

Selected FSL Functions

Xerox FS 5250, User’s Guide

11.7.4 Selecting duplex printing

The duplex command (Y19) has one parameter with three different settings:

Setting Description

0No duplex printing

1Duplex, long-edge binding

2Duplex, short-edge binding

See the paragraph below on how to select duplex printing. You send the command as follows:

&&??% %Y19,<n1>% &&??<space>

The command &&??% selects the character "%" as the escape character. The escape character is a signal to the interface that the data stream following is a command stream. The last command in the above line (&&?? <space>) erases the escape character again.

NOTE:

You cannot save the duplex command in the permanent memory.

11.7.5 Orientation

As mentioned above, you can combine the duplex function with the orientation (or paper format) function Y10 and select various binding options. The orientation command has two parameters where you only need to use the first. The first parameter has several different settings:

Setting Description

0Portrait

1Landscape

2Computer Output Reduction (COR)

82 COR regardless of PPM print quality

NOTE:

You should not select different settings for the front and the back of a sheet of paper.

For a more detailed description of the settings, you are referred to the chapter on selecting paper formats.

- 68 -