Canon 2300 manual If you want to cancel a copy job in the standby mode

●If you want to cancel a copy job in the standby mode:

❑ Press [Stop].

Stop

The display for selecting a copy job to cancel appears.

1

Introduction to Copying

F2

F3

F4

Interrupt

Start

ID

❑Press [F2] (▼) or [F3] (▲) to select the copy job you want to cancel ➞ press [F4] (CANCEL).

The selected job is canceled.

NOTE

After pressing (Stop), several copies may continue to print out.

You can also cancel a copy job from the System Monitor screen. (See "Using the System Monitor Screen," on p. 1-17.)

●If you want to interrupt a copy job:

❑To interrupt a copy job when you need to make priority copies, press [Interrupt]. For instructions on interrupting a copy job, see "Interrupt Mode," on p. 1-20.

The message <ABLE TO PERFORM INTERRUPT JOB> appears on the LCD display.

●If you want to reserve a copy job and scan an original while the machine is printing:

❑Place your original ➞ press [Start].

For instructions on reserving a copy job, see "Reserved Copying," on p. 1-18.

8 When scanning is complete, remove your original.

9 If you have set Department ID Management, press [ID].

For instructions on using Department ID Management, see Chapter 5, "System Manager Settings," in the Reference Guide.

1-8Flow of Copy Operations