Canon 2300 manual Image Combination, Original Vertical Placement Copy

Page 70

Image Combination

This mode enables you to automatically reduce two or four originals to ﬁt onto one side of a selected paper size.

IMPORTANT

If the machine is operating in the Image Combination mode, you cannot use the Two-Page Separation, Original Frame Erase, Book Frame Erase, or Different Size Originals modes.

You can set the Image Combination mode only for the original sizes shown on the LCD display.

Originals copied in the Image Combination mode must all be the same size. The Image Combination mode cannot be used with free size paper.

You must have enough memory available in order to use the Image Combination mode with paper larger than LTR.

NOTE

The reduction ratio is automatically set so that the originals ﬁt onto the selected paper size.

If the reduction ratio is set to less than 50% in the Image Combination mode, part of the copied image may be trimmed slightly.

If you set the Image Combination mode, the machine is automatically set to the Auto Zoom mode. However, you can also use the Preset Zoom or Zoom by Percentage mode.

■2 on 1

This setting reduces two originals to ﬁt onto one copy sheet, and allows you to select the layout order of each original. The following two layout types are available:

3

Special Copying Features

Original (Vertical Placement)

1

2

IMPORTANT

Copy

No. 1

No. 2

1

2

2

1

The originals are printed	The originals are printed in
in the following order: left	the following order: right
half (1) → right half (2)	half (1) → left half (2)

The layout order cannot be speciﬁed when you place an original horizontally.

Image Combination

3-17

Image 70

Contents Page ImageCLASS 2300 Copying Guide Manuals for the Machine Set-Up Sheet For the Machine For Networking and PrintingHow This Manual Is Organized AppendixContents Customizing Settings Special Copying FeaturesAppendix Symbols Used in This Manual How to Use This ManualKeys Used in This Manual Vii Copyright Legal NoticesTrademarks DisclaimersIntroduction to Copying Special Features Screen Copy Basic Features ScreenOverview of the imageCLASS Additional Functions Menu If the message Enter Department ID and Password appears Press Copy to display the Copy Basic Features screenFlow of Copy Operations Place your original Set the desired copy modes on the Special Features screen Set the desired copy mode on the Copy Basic Features screenEnter the copy quantity Press Start If you want to stop a copy job while scanningIf you want to cancel a copy job in the standby mode If you want to interrupt a copy jobPlaten Glass Placing OriginalsFeeder Orientation Vertical Placement Horizontal Placement FeederVertical Placement Horizontal Placement Platen GlassLift up the feeder Platen GlassPlace your original face down Gently lower the feeder Copyingto Introduction CautionFeeder SpeciﬁcationsAdjust the slide guides to ﬁt the size of your originals To Copying Original Output TrayPress Stop to stop scanning Canceling a Copy JobUsing the Stop Key If only one copy job is being processedPress F4 Cancel Using the System Monitor ScreenPress F2 or F3 to select the job to be canceled Press MonitorCopy 1 Press Copy Reserved CopyingReserving Copy Jobs While Printing Place your original, and set the desired copy modesReserved Copying Interrupt Mode Press InterruptOnce the original is scanned, remove it from the machine 22Interrupt Mode Basic Copying Features Specifying the Required Number of Copies Copy QuantityChanging the Copy Quantity Copy Quantity Paper Selection Automatic Paper SelectionPlace your original press F2 Paper Select Make sure that Auto Paper is selected press OKManual Paper Selection If you want to use the stack bypass Press F3 or F4 to select the desired paper sizeEach time you press Paper Size setting menu returns Image Quality Manual Text Mode Text/Photo ModeCopy Exposure Manual Copy Exposure and Image Quality AutomaticCopy Exposure Manual Press F1 Light or F3 Dark to adjust the exposure press OKPlace your original press F3 Density Image Quality Manual Press F4 to select the image quality of the original Text Copy Exposure and Image Quality AutomaticPlace your original press F4 Imagequality TEXT/PHOTO, or Photo press OKPress F2 Auto Exposur OK Zoom by Percentage Preset ZoomChanging the Copy Zoom Ratio Auto ZoomReduce Preset ZoomPlace your original press F1 Copy Ratio EnlargeZoom by Percentage Each time you press Reduce orAuto Zoom Set the copy ratio using the numeric keys press OK200%. Enter a value within the setting range Correct valuePress OK Press F1 Copy RatioStart Collating Copies If the Collate Mode Is SetIf the Rotate Mode Is Set Originals Set ResultOrder Collate If you want to set the Rotate modePlace your originals press Collate 22Collating Copies Special Copying Features Place your original on the platen glass press Special Features to select a copy functionTwo-Page Separation OriginalPress F3 Left Opening or F4 Rght Opening to select FeaturesPress F1 2-PAGE SEP Direction that the book opens press OKSpecial Copying Features Press F4 Orignal Size to select the paper size press OKMargin Mode Margin press OK Press F2 MarginMARGIN, or F4 Bottom Mrgn to specify the type Press F3 or F4 + to set the margin width 1 mm toCopying starts If you want to cancel this mode, press Frame Erase Original Frame EraseBook Frame Erase Book Frame Erase Mode Original Selected Copy Not SelectedHole Punch Erase Press F3 Frame Erase Lights, and the Copy Basic Features screen appearsOriginal Frame Erase Make sure that Frame Erase is selected press OKPress Start Features Book Frame EraseSpecial Copying Features Hole Punch Erase Press F4 Orignal Size to select the size of the original 16Frame Erase Original Vertical Placement Copy Image CombinationOriginal Vertical Placement Place your originals press Special Features Press F4 Layout CopyIf you selected 2 on 1 Comb in step If you selected 4 on 1 in stepSize Paper size press OKNumber of Copies, on p Different Size Originals ModeSet the desired copy modes Press Start 24Different Size Originals Customizing Settings Copy Settings Table Available Settings ApplicableImage Quality and Copy Exposure Changing the Current Standard SettingsPress Additional Functions Press Reset to return to the Basic Features screen Press F3 or F4 to highlight 02 Copy Settings Press OKPress F3 or F4 to highlight 01 STD Image QUAL/ EXP press OK Zoom Ratio Press F3 or F4 to highlight 02 STD Zoom Ratio Press OK50% to 200% press OK Copy QuantityClear to clear the value Press F3 or F4 to highlight 03 Standard Copy QTY press OK Frame Erase Width Press F3 or F4 to highlight 04 Frame Erase Width press OKPress F2 or F3 + to set the desired frame erase width Auto SortMm to 20 mm press OK Press F3 or F4 to highlight 05 Auto Sort Sort RotatePress F3 or F4 to select 01 on or 02 OFF Press F3 or F4 to highlight 06 Sort Rotate Sharp SharpnessDull Original Copy Dull Is Set Dull Is Not SetPress F3 or F4 to highlight 08 Sharpness press OK Prescan Press F3 or F4 to highlight 09 Prescan press OKIf you want to use the prescan function, select 01 on Using Shortcut Keys Assigning FunctionsPress F3 or F4 to highlight 07 Shortcut KEY SET press OK Setting Applicable That contains the copy mode you want to setIf necessary, specify the settings for each mode Making CopiesAppendix Combination of Functions Chart Combination unavailableCombination available Combination unavailable Function to Be Set SetOriginals Size Different Index NumericsAppendix 8Index