Canon 2300 manual Image Quality Manual, Copy 1 Press Copy

Page 42

Image Quality (Manual)

This mode enables you to adjust the image quality to the level best suited to the quality of text or photo originals.

IMPORTANT

Combinations of these three modes (Text, Text/Photo, and Photo) cannot be set at once. If you select one of these modes, the previously set mode is canceled.

NOTE

The default setting is 'TEXT'.

If you select the Text, Text/Photo, or Photo mode, the exposure can be adjusted only by the manual exposure control. The automatic exposure control cannot be selected.

If the original is a transparency, select the Text, Text/Photo, or Photo mode and adjust the exposure to the most appropriate level.

Text Mode

This mode is best suited for making copies from text originals. Blueprints or penciled originals can be copied clearly.

Text/Photo Mode

This mode is best suited for making copies from originals containing both text and photos.

Photo Mode

This mode is best suited for making copies from photos printed on photographic paper, or photo originals containing halftones (i.e., printed photos).

IMPORTANT

If you make copies of an original containing halftones, such as a printed photograph using the Photo mode, moiré may occur. If this happens, you can soften this moiré effect by adjusting the Sharpness level. (See "Sharpness," on p. 4-12.)

COPY 1 Press [COPY].

COPY lights, and the Copy Basic Features screen appears.

2

Basic Copying Features

Copy Exposure and Image Quality Adjustments

2-11

Image 42

Contents Page ImageCLASS 2300 Copying Guide Manuals for the Machine Set-Up Sheet For the Machine For Networking and PrintingHow This Manual Is Organized AppendixContents Special Copying Features Customizing SettingsAppendix How to Use This Manual Symbols Used in This ManualKeys Used in This Manual Vii Copyright Legal NoticesTrademarks DisclaimersIntroduction to Copying Copy Basic Features Screen Special Features ScreenOverview of the imageCLASS Additional Functions Menu Press Copy to display the Copy Basic Features screen If the message Enter Department ID and Password appearsFlow of Copy Operations Place your original Set the desired copy mode on the Copy Basic Features screen Set the desired copy modes on the Special Features screenEnter the copy quantity Press Start If you want to stop a copy job while scanningIf you want to cancel a copy job in the standby mode If you want to interrupt a copy jobPlacing Originals Platen GlassFeeder Orientation Vertical Placement Horizontal Placement FeederVertical Placement Horizontal Placement Platen GlassPlaten Glass Lift up the feederPlace your original face down Gently lower the feeder Copyingto Introduction CautionFeeder SpeciﬁcationsAdjust the slide guides to ﬁt the size of your originals To Copying Original Output TrayPress Stop to stop scanning Canceling a Copy JobUsing the Stop Key If only one copy job is being processedPress F4 Cancel Using the System Monitor ScreenPress F2 or F3 to select the job to be canceled Press MonitorCopy 1 Press Copy Reserved CopyingReserving Copy Jobs While Printing Place your original, and set the desired copy modesReserved Copying Interrupt Mode Press InterruptOnce the original is scanned, remove it from the machine 22Interrupt Mode Basic Copying Features Copy Quantity Specifying the Required Number of CopiesChanging the Copy Quantity Copy Quantity Paper Selection Automatic Paper SelectionPlace your original press F2 Paper Select Make sure that Auto Paper is selected press OKManual Paper Selection Press F3 or F4 to select the desired paper size If you want to use the stack bypassEach time you press Paper Size setting menu returns Image Quality Manual Text Mode Text/Photo ModeCopy Exposure Manual Copy Exposure and Image Quality AutomaticPress F1 Light or F3 Dark to adjust the exposure press OK Copy Exposure ManualPlace your original press F3 Density Image Quality Manual Press F4 to select the image quality of the original Text Copy Exposure and Image Quality AutomaticPlace your original press F4 Imagequality TEXT/PHOTO, or Photo press OKPress F2 Auto Exposur OK Zoom by Percentage Preset ZoomChanging the Copy Zoom Ratio Auto ZoomReduce Preset ZoomPlace your original press F1 Copy Ratio EnlargeZoom by Percentage Each time you press Reduce orAuto Zoom Set the copy ratio using the numeric keys press OK200%. Enter a value within the setting range Correct valuePress OK Press F1 Copy RatioStart Collating Copies If the Collate Mode Is SetIf the Rotate Mode Is Set Originals Set ResultIf you want to set the Rotate mode Order CollatePlace your originals press Collate 22Collating Copies Special Copying Features Place your original on the platen glass press Special Features to select a copy functionTwo-Page Separation OriginalPress F3 Left Opening or F4 Rght Opening to select FeaturesPress F1 2-PAGE SEP Direction that the book opens press OKSpecial Copying Features Press F4 Orignal Size to select the paper size press OKMargin Mode Margin press OK Press F2 MarginMARGIN, or F4 Bottom Mrgn to specify the type Press F3 or F4 + to set the margin width 1 mm toCopying starts If you want to cancel this mode, press Frame Erase Original Frame EraseBook Frame Erase Mode Original Selected Copy Not Selected Book Frame EraseHole Punch Erase Press F3 Frame Erase Lights, and the Copy Basic Features screen appearsOriginal Frame Erase Make sure that Frame Erase is selected press OKPress Start Features Book Frame EraseSpecial Copying Features Hole Punch Erase Press F4 Orignal Size to select the size of the original 16Frame Erase Original Vertical Placement Copy Image CombinationOriginal Vertical Placement Place your originals press Special Features Press F4 Layout CopyIf you selected 2 on 1 Comb in step If you selected 4 on 1 in stepPaper size press OK SizeNumber of Copies, on p Different Size Originals ModeSet the desired copy modes Press Start 24Different Size Originals Customizing Settings Copy Settings Table Available Settings ApplicableChanging the Current Standard Settings Image Quality and Copy ExposurePress Additional Functions Press F3 or F4 to highlight 02 Copy Settings Press OK Press Reset to return to the Basic Features screenPress F3 or F4 to highlight 01 STD Image QUAL/ EXP press OK Zoom Ratio Press F3 or F4 to highlight 02 STD Zoom Ratio Press OKCopy Quantity 50% to 200% press OKClear to clear the value Press F3 or F4 to highlight 03 Standard Copy QTY press OK Frame Erase Width Press F3 or F4 to highlight 04 Frame Erase Width press OKAuto Sort Press F2 or F3 + to set the desired frame erase widthMm to 20 mm press OK Sort Rotate Press F3 or F4 to highlight 05 Auto SortPress F3 or F4 to select 01 on or 02 OFF Press F3 or F4 to highlight 06 Sort Rotate Sharp SharpnessDull Original Copy Dull Is Set Dull Is Not SetPress F3 or F4 to highlight 08 Sharpness press OK Prescan Press F3 or F4 to highlight 09 Prescan press OKIf you want to use the prescan function, select 01 on Using Shortcut Keys Assigning FunctionsPress F3 or F4 to highlight 07 Shortcut KEY SET press OK Setting Applicable That contains the copy mode you want to setIf necessary, specify the settings for each mode Making CopiesAppendix Combination of Functions Chart Combination unavailableCombination available Combination unavailable Function to Be Set SetOriginals Size Different Index NumericsAppendix 8Index