Canon 2300 manual Place your original press F2 Paper Select

Page 36

COPY

F2

OK

Start

1 Press [COPY].

COPY lights, and the Copy Basic Features screen appears.

2 Place your original ➞ press [F2] (PAPER SELECT).

The display for selecting the paper size appears.

NOTE

The default setting is 'AUTO PAPER'.

If DRAWER ELIGIBLTY is set to '01 OFF' in Common Settings (from the Additional Functions menu), <AUTO PAPER> is not displayed. (See Chapter 3, "Selecting and Storing Settings," in the Reference Guide.)

3 Make sure that <AUTO PAPER> is selected ➞ press [OK].

The selected mode is set, and the display returns to the Copy Basic Features screen.

4 Press [Start].

Copying starts.

NOTE

If the message <LOAD THE APPROPRIATE SIZE PAPER> appears, the paper loaded in the paper drawers is different from the original paper size. Load the

appropriate paper. If you press (Start) without loading the correct paper size, the machine automatically selects the smallest loaded paper size, and starts copying.

2

Basic Copying Features

Paper Selection

2-5

Image 36

Contents Page ImageCLASS 2300 Copying Guide Manuals for the Machine Set-Up Sheet For the Machine For Networking and PrintingHow This Manual Is Organized AppendixContents Special Copying Features Customizing SettingsAppendix How to Use This Manual Symbols Used in This ManualKeys Used in This Manual Vii Legal Notices TrademarksCopyright DisclaimersIntroduction to Copying Copy Basic Features Screen Special Features ScreenOverview of the imageCLASS Additional Functions Menu Press Copy to display the Copy Basic Features screen If the message Enter Department ID and Password appearsFlow of Copy Operations Place your original Set the desired copy mode on the Copy Basic Features screen Set the desired copy modes on the Special Features screenEnter the copy quantity Press Start If you want to stop a copy job while scanningIf you want to cancel a copy job in the standby mode If you want to interrupt a copy jobPlacing Originals Platen GlassFeeder Vertical Placement Horizontal Placement Feeder Vertical Placement Horizontal PlacementOrientation Platen GlassPlaten Glass Lift up the feederPlace your original face down Gently lower the feeder Copyingto Introduction CautionFeeder SpeciﬁcationsAdjust the slide guides to ﬁt the size of your originals To Copying Original Output TrayCanceling a Copy Job Using the Stop KeyPress Stop to stop scanning If only one copy job is being processedUsing the System Monitor Screen Press F2 or F3 to select the job to be canceledPress F4 Cancel Press MonitorReserved Copying Reserving Copy Jobs While PrintingCopy 1 Press Copy Place your original, and set the desired copy modesReserved Copying Interrupt Mode Press InterruptOnce the original is scanned, remove it from the machine 22Interrupt Mode Basic Copying Features Copy Quantity Specifying the Required Number of CopiesChanging the Copy Quantity Copy Quantity Paper Selection Automatic Paper SelectionPlace your original press F2 Paper Select Make sure that Auto Paper is selected press OKManual Paper Selection Press F3 or F4 to select the desired paper size If you want to use the stack bypassEach time you press Paper Size setting menu returns Text Mode Text/Photo Mode Copy Exposure ManualImage Quality Manual Copy Exposure and Image Quality AutomaticPress F1 Light or F3 Dark to adjust the exposure press OK Copy Exposure ManualPlace your original press F3 Density Image Quality Manual Copy Exposure and Image Quality Automatic Place your original press F4 ImagequalityPress F4 to select the image quality of the original Text TEXT/PHOTO, or Photo press OKPress F2 Auto Exposur OK Preset Zoom Changing the Copy Zoom RatioZoom by Percentage Auto ZoomPreset Zoom Place your original press F1 Copy RatioReduce EnlargeZoom by Percentage Each time you press Reduce orSet the copy ratio using the numeric keys press OK 200%. Enter a value within the setting rangeAuto Zoom Correct valuePress OK Press F1 Copy RatioStart If the Collate Mode Is Set If the Rotate Mode Is SetCollating Copies Originals Set ResultIf you want to set the Rotate mode Order CollatePlace your originals press Collate 22Collating Copies Special Copying Features Features to select a copy function Two-Page SeparationPlace your original on the platen glass press Special OriginalFeatures Press F1 2-PAGE SEPPress F3 Left Opening or F4 Rght Opening to select Direction that the book opens press OKSpecial Copying Features Press F4 Orignal Size to select the paper size press OKMargin Mode Press F2 Margin MARGIN, or F4 Bottom Mrgn to specify the typeMargin press OK Press F3 or F4 + to set the margin width 1 mm toCopying starts If you want to cancel this mode, press Frame Erase Original Frame EraseBook Frame Erase Mode Original Selected Copy Not Selected Book Frame EraseHole Punch Erase Lights, and the Copy Basic Features screen appears Original Frame ErasePress F3 Frame Erase Make sure that Frame Erase is selected press OKPress Start Features Book Frame EraseSpecial Copying Features Hole Punch Erase Press F4 Orignal Size to select the size of the original 16Frame Erase Original Vertical Placement Copy Image CombinationOriginal Vertical Placement Place your originals press Special Features Press F4 Layout CopyIf you selected 2 on 1 Comb in step If you selected 4 on 1 in stepPaper size press OK SizeNumber of Copies, on p Different Size Originals ModeSet the desired copy modes Press Start 24Different Size Originals Customizing Settings Copy Settings Table Available Settings ApplicableChanging the Current Standard Settings Image Quality and Copy ExposurePress Additional Functions Press F3 or F4 to highlight 02 Copy Settings Press OK Press Reset to return to the Basic Features screenPress F3 or F4 to highlight 01 STD Image QUAL/ EXP press OK Zoom Ratio Press F3 or F4 to highlight 02 STD Zoom Ratio Press OKCopy Quantity 50% to 200% press OKClear to clear the value Press F3 or F4 to highlight 03 Standard Copy QTY press OK Frame Erase Width Press F3 or F4 to highlight 04 Frame Erase Width press OKAuto Sort Press F2 or F3 + to set the desired frame erase widthMm to 20 mm press OK Sort Rotate Press F3 or F4 to highlight 05 Auto SortPress F3 or F4 to select 01 on or 02 OFF Press F3 or F4 to highlight 06 Sort Rotate Sharpness DullSharp Original Copy Dull Is Set Dull Is Not SetPress F3 or F4 to highlight 08 Sharpness press OK Prescan Press F3 or F4 to highlight 09 Prescan press OKIf you want to use the prescan function, select 01 on Using Shortcut Keys Assigning FunctionsPress F3 or F4 to highlight 07 Shortcut KEY SET press OK That contains the copy mode you want to set If necessary, specify the settings for each modeSetting Applicable Making CopiesAppendix Combination of Functions Chart Combination unavailableCombination available Combination unavailable Function to Be Set SetOriginals Size Different Index NumericsAppendix 8Index