Canon 2300 manual Original Frame Erase, Press F3 Frame Erase

Page 63

3

Special Copying Features

Original Frame Erase

This mode erases the dark borders and frame lines that appear around the copy when the original is smaller than the selected paper size. Also, it creates a blank border around the edge of the copy.

IMPORTANT

In order to use the Original Frame Erase mode, you must ﬁrst set the standard frame erase width in the Additional Functions menu. (See "Frame Erase Width," on p. 4-8.)

If the machine is operating in the Original Frame Erase mode, you cannot use the Image Combination, or Different Size Originals mode.

NOTE

You can set the Original Frame Erase width from 1 to 20 mm.

The default setting is '2 mm'.

		1	Press [COPY].
COPY
					lights, and the Copy Basic Features screen appears.
				COPY
Special Features		2	Place your original ➞ press [Special Features].

The display for selecting a copy function appears.

F3

3 Press [F3] (FRAME ERASE).

The display for selecting a frame erase type appears.

OK

4 Make sure that <FRAME ERASE> is selected ➞ press [OK].

The Original Size setting menu appears.

3-10Frame Erase

Image 63

Contents Page ImageCLASS 2300 Copying Guide Set-Up Sheet For the Machine For Networking and Printing Manuals for the MachineAppendix How This Manual Is OrganizedContents Special Copying Features Customizing SettingsAppendix How to Use This Manual Symbols Used in This ManualKeys Used in This Manual Vii Disclaimers Legal NoticesTrademarks CopyrightIntroduction to Copying Copy Basic Features Screen Special Features ScreenOverview of the imageCLASS Additional Functions Menu Press Copy to display the Copy Basic Features screen If the message Enter Department ID and Password appearsFlow of Copy Operations Place your original Set the desired copy mode on the Copy Basic Features screen Set the desired copy modes on the Special Features screenEnter the copy quantity If you want to stop a copy job while scanning Press StartIf you want to interrupt a copy job If you want to cancel a copy job in the standby modePlacing Originals Platen GlassFeeder Platen Glass Vertical Placement Horizontal Placement FeederVertical Placement Horizontal Placement OrientationPlaten Glass Lift up the feederPlace your original face down Copyingto Introduction Caution Gently lower the feederSpeciﬁcations FeederAdjust the slide guides to ﬁt the size of your originals Original Output Tray To CopyingIf only one copy job is being processed Canceling a Copy JobUsing the Stop Key Press Stop to stop scanningPress Monitor Using the System Monitor ScreenPress F2 or F3 to select the job to be canceled Press F4 CancelPlace your original, and set the desired copy modes Reserved CopyingReserving Copy Jobs While Printing Copy 1 Press CopyReserved Copying Press Interrupt Interrupt ModeOnce the original is scanned, remove it from the machine 22Interrupt Mode Basic Copying Features Copy Quantity Specifying the Required Number of CopiesChanging the Copy Quantity Copy Quantity Automatic Paper Selection Paper SelectionMake sure that Auto Paper is selected press OK Place your original press F2 Paper SelectManual Paper Selection Press F3 or F4 to select the desired paper size If you want to use the stack bypassEach time you press Paper Size setting menu returns Copy Exposure and Image Quality Automatic Text Mode Text/Photo ModeCopy Exposure Manual Image Quality ManualPress F1 Light or F3 Dark to adjust the exposure press OK Copy Exposure ManualPlace your original press F3 Density Image Quality Manual TEXT/PHOTO, or Photo press OK Copy Exposure and Image Quality AutomaticPlace your original press F4 Imagequality Press F4 to select the image quality of the original TextPress F2 Auto Exposur OK Auto Zoom Preset ZoomChanging the Copy Zoom Ratio Zoom by PercentageEnlarge Preset ZoomPlace your original press F1 Copy Ratio ReduceEach time you press Reduce or Zoom by PercentageCorrect value Set the copy ratio using the numeric keys press OK200%. Enter a value within the setting range Auto ZoomPress F1 Copy Ratio Press OKStart Originals Set Result If the Collate Mode Is SetIf the Rotate Mode Is Set Collating CopiesIf you want to set the Rotate mode Order CollatePlace your originals press Collate 22Collating Copies Special Copying Features Original Features to select a copy functionTwo-Page Separation Place your original on the platen glass press SpecialDirection that the book opens press OK FeaturesPress F1 2-PAGE SEP Press F3 Left Opening or F4 Rght Opening to selectPress F4 Orignal Size to select the paper size press OK Special Copying FeaturesMargin Mode Press F3 or F4 + to set the margin width 1 mm to Press F2 MarginMARGIN, or F4 Bottom Mrgn to specify the type Margin press OKCopying starts If you want to cancel this mode, press Original Frame Erase Frame EraseBook Frame Erase Mode Original Selected Copy Not Selected Book Frame EraseHole Punch Erase Make sure that Frame Erase is selected press OK Lights, and the Copy Basic Features screen appearsOriginal Frame Erase Press F3 Frame ErasePress Start Book Frame Erase FeaturesSpecial Copying Features Hole Punch Erase Press F4 Orignal Size to select the size of the original 16Frame Erase Image Combination Original Vertical Placement CopyOriginal Vertical Placement Press F4 Layout Copy Place your originals press Special FeaturesIf you selected 4 on 1 in step If you selected 2 on 1 Comb in stepPaper size press OK SizeNumber of Copies, on p Mode Different Size OriginalsSet the desired copy modes Press Start 24Different Size Originals Customizing Settings Available Settings Applicable Copy Settings TableChanging the Current Standard Settings Image Quality and Copy ExposurePress Additional Functions Press F3 or F4 to highlight 02 Copy Settings Press OK Press Reset to return to the Basic Features screenPress F3 or F4 to highlight 01 STD Image QUAL/ EXP press OK Press F3 or F4 to highlight 02 STD Zoom Ratio Press OK Zoom RatioCopy Quantity 50% to 200% press OKClear to clear the value Press F3 or F4 to highlight 03 Standard Copy QTY press OK Press F3 or F4 to highlight 04 Frame Erase Width press OK Frame Erase WidthAuto Sort Press F2 or F3 + to set the desired frame erase widthMm to 20 mm press OK Sort Rotate Press F3 or F4 to highlight 05 Auto SortPress F3 or F4 to select 01 on or 02 OFF Press F3 or F4 to highlight 06 Sort Rotate Original Copy Dull Is Set Dull Is Not Set SharpnessDull SharpPress F3 or F4 to highlight 08 Sharpness press OK Press F3 or F4 to highlight 09 Prescan press OK PrescanIf you want to use the prescan function, select 01 on Assigning Functions Using Shortcut KeysPress F3 or F4 to highlight 07 Shortcut KEY SET press OK Making Copies That contains the copy mode you want to setIf necessary, specify the settings for each mode Setting ApplicableAppendix Combination unavailable Combination of Functions ChartCombination available Combination unavailable Set Function to Be SetOriginals Size Different Numerics IndexAppendix 8Index