Canon 2300 manual Copy Exposure Manual, Place your original press F3 Density

Page 41

Copy Exposure (Manual)

You can manually adjust the exposure to the most appropriate level for the original.

COPY

2

F3

Basic Copying Features

F1

F3

OK

Start

1 Press [COPY].

COPY lights, and the Copy Basic Features screen appears.

2 Place your original ➞ press [F3] (DENSITY).

The display for setting a scan mode appears.

3 Press [F1] (LIGHT) or [F3] (DARK) to adjust the exposure ➞ press [OK].

Press	F1	(LIGHT) or	F3	(DARK) to move the indicator to the left to make

the exposure lighter, or to the right to make the exposure darker.

The selected mode is set, and the Copy Basic Features screen returns.

4 Press [Start].

Copying starts.

NOTE

To adjust the copy exposure automatically, see "Copy Exposure and Image Quality (Automatic)," on p. 2-12.

To cancel all settings and restore the machine's standard settings, press (Reset).

2-10Copy Exposure and Image Quality Adjustments

Image 41

Contents Page ImageCLASS 2300 Copying Guide Set-Up Sheet For the Machine For Networking and Printing Manuals for the MachineAppendix How This Manual Is OrganizedContents Appendix Special Copying FeaturesCustomizing Settings Keys Used in This Manual How to Use This ManualSymbols Used in This Manual Vii Trademarks Legal NoticesCopyright DisclaimersIntroduction to Copying Overview of the imageCLASS Copy Basic Features ScreenSpecial Features Screen Additional Functions Menu Flow of Copy Operations Press Copy to display the Copy Basic Features screenIf the message Enter Department ID and Password appears Place your original Enter the copy quantity Set the desired copy mode on the Copy Basic Features screenSet the desired copy modes on the Special Features screen If you want to stop a copy job while scanning Press StartIf you want to interrupt a copy job If you want to cancel a copy job in the standby modeFeeder Placing OriginalsPlaten Glass Vertical Placement Horizontal Placement Vertical Placement Horizontal Placement FeederOrientation Platen GlassPlace your original face down Platen GlassLift up the feeder Copyingto Introduction Caution Gently lower the feederSpeciﬁcations FeederAdjust the slide guides to ﬁt the size of your originals Original Output Tray To CopyingUsing the Stop Key Canceling a Copy JobPress Stop to stop scanning If only one copy job is being processedPress F2 or F3 to select the job to be canceled Using the System Monitor ScreenPress F4 Cancel Press MonitorReserving Copy Jobs While Printing Reserved CopyingCopy 1 Press Copy Place your original, and set the desired copy modesReserved Copying Press Interrupt Interrupt ModeOnce the original is scanned, remove it from the machine 22Interrupt Mode Basic Copying Features Changing the Copy Quantity Copy QuantitySpecifying the Required Number of Copies Copy Quantity Automatic Paper Selection Paper SelectionMake sure that Auto Paper is selected press OK Place your original press F2 Paper SelectManual Paper Selection Each time you press Press F3 or F4 to select the desired paper sizeIf you want to use the stack bypass Paper Size setting menu returns Copy Exposure Manual Text Mode Text/Photo ModeImage Quality Manual Copy Exposure and Image Quality AutomaticPlace your original press F3 Density Press F1 Light or F3 Dark to adjust the exposure press OKCopy Exposure Manual Image Quality Manual Place your original press F4 Imagequality Copy Exposure and Image Quality AutomaticPress F4 to select the image quality of the original Text TEXT/PHOTO, or Photo press OKPress F2 Auto Exposur OK Changing the Copy Zoom Ratio Preset ZoomZoom by Percentage Auto ZoomPlace your original press F1 Copy Ratio Preset ZoomReduce EnlargeEach time you press Reduce or Zoom by Percentage200%. Enter a value within the setting range Set the copy ratio using the numeric keys press OKAuto Zoom Correct valuePress F1 Copy Ratio Press OKStart If the Rotate Mode Is Set If the Collate Mode Is SetCollating Copies Originals Set ResultPlace your originals press Collate If you want to set the Rotate modeOrder Collate 22Collating Copies Special Copying Features Two-Page Separation Features to select a copy functionPlace your original on the platen glass press Special OriginalPress F1 2-PAGE SEP FeaturesPress F3 Left Opening or F4 Rght Opening to select Direction that the book opens press OKPress F4 Orignal Size to select the paper size press OK Special Copying FeaturesMargin Mode MARGIN, or F4 Bottom Mrgn to specify the type Press F2 MarginMargin press OK Press F3 or F4 + to set the margin width 1 mm toCopying starts If you want to cancel this mode, press Original Frame Erase Frame EraseHole Punch Erase Book Frame Erase Mode Original Selected Copy Not SelectedBook Frame Erase Original Frame Erase Lights, and the Copy Basic Features screen appearsPress F3 Frame Erase Make sure that Frame Erase is selected press OKPress Start Book Frame Erase FeaturesSpecial Copying Features Hole Punch Erase Press F4 Orignal Size to select the size of the original 16Frame Erase Image Combination Original Vertical Placement CopyOriginal Vertical Placement Press F4 Layout Copy Place your originals press Special FeaturesIf you selected 4 on 1 in step If you selected 2 on 1 Comb in stepNumber of Copies, on p Paper size press OKSize Mode Different Size OriginalsSet the desired copy modes Press Start 24Different Size Originals Customizing Settings Available Settings Applicable Copy Settings TablePress Additional Functions Changing the Current Standard SettingsImage Quality and Copy Exposure Press F3 or F4 to highlight 01 STD Image QUAL/ EXP press OK Press F3 or F4 to highlight 02 Copy Settings Press OKPress Reset to return to the Basic Features screen Press F3 or F4 to highlight 02 STD Zoom Ratio Press OK Zoom RatioClear to clear the value Copy Quantity50% to 200% press OK Press F3 or F4 to highlight 03 Standard Copy QTY press OK Press F3 or F4 to highlight 04 Frame Erase Width press OK Frame Erase WidthMm to 20 mm press OK Auto SortPress F2 or F3 + to set the desired frame erase width Press F3 or F4 to select 01 on or 02 OFF Sort RotatePress F3 or F4 to highlight 05 Auto Sort Press F3 or F4 to highlight 06 Sort Rotate Dull SharpnessSharp Original Copy Dull Is Set Dull Is Not SetPress F3 or F4 to highlight 08 Sharpness press OK Press F3 or F4 to highlight 09 Prescan press OK PrescanIf you want to use the prescan function, select 01 on Assigning Functions Using Shortcut KeysPress F3 or F4 to highlight 07 Shortcut KEY SET press OK If necessary, specify the settings for each mode That contains the copy mode you want to setSetting Applicable Making CopiesAppendix Combination unavailable Combination of Functions ChartCombination available Combination unavailable Set Function to Be SetOriginals Size Different Numerics IndexAppendix 8Index