3
Troubleshooting
MEMORY FULL
Cause | The machine’s memory is full of scanned documents. |
|
|
Remedy | Divide the original into some stacks and scan them one by one. |
| |
NO APPROPRIATE SIZE | |
|
|
|
|
Cause | Although <AUTO> is selected when copying, paper of suitable size is not set in |
| the paper drawer nor on the stack bypass. |
|
|
Remedy | Select the paper size, or set the copy ratio. |
| If you press [Start] while this message is displayed, the paper with the least |
| margin is selected automatically and printing starts. |
| |
NO CONTROL CARD/INSERT CONTROL CARD | |
|
|
Cause | The control card is not inserted into the card reader. |
|
|
Remedy | Insert the control card into the card reader. |
| |
NO DOCUMENT/CHECK FEEDER | |
|
|
|
|
Cause | No document is loaded in the feeder. |
|
|
Remedy | Load a document in the feeder. |
| |
OUT OF STAPLES/REPLACE STAPLE CART. | |
|
|
|
|
Cause | There are only few staples remaining in the staple cartridge. |
|
|
Remedy | Replace the staple cartridge. |
| |
OUT OF TONER/CHANGE TONER | |
|
|
|
|
Cause | The toner cartridge has run out of toner. |
|
|
Remedy | Replace the toner cartridge. |