Canon 2016 manual Staple JAM/OPEN Finisher Cover

Page 84

3

Troubleshooting

STAPLE JAM/OPEN FINISHER COVER

Cause	A staple jam may have occurred in the Finisher-U1.

Remedy	Check if a staple jam has occurred.

STOP KEY PRESSED/PRESS OK KEY


Cause	[Stop] has been pressed while scanning the original using the feeder.

Remedy	Press [OK], and set the original again.

SYSTEM ERROR/Exxx*

Cause	An error of some kind has occurred in the machine.

Remedy	Turn OFF the main power, wait for more than 10 seconds, then turn it ON again.
	If this does not solve the problem, unplug the machine and contact your local
	authorized Canon dealer.

*xxx stands for a number.

TONER LOW/PREPARE NEW TONER

Cause	Toner is running out.

Remedy	Rock the toner cartridge to redistribute the toner evenly inside the cartridge. If
	the message persists, install a new cartridge.

TOO MANY OUTPUTS/CANNOT STAPLE


Cause	The machine cannot staple the printouts because too many sheets of paper
	have been printed out.

Remedy	The printouts are simply collated without stapling. If necessary, reduce the
	number of pages in the document and print again.

WASTE TONER FULL


Cause	The drum cartridge is filled with waste toner.

Remedy	Contact your local authorized Canon dealer.

3-10List of Error Messages

Image 84

Contents Users Guide Page IR2020/iR2016 User’s Guide Manuals for the Machine PCL Driver Guide UFR II Driver Guide Fax Driver Guide How This Manual Is Organized Contents Before You Start Using This Machine Routine Maintenance How to Use This Manual Symbols Used in This ManualKeys Used in This Manual Illustrations Used in This ManualLaser Safety Legal NoticesTTE Directive Additional Information International Energy Star Program EMC DirectiveAbbreviations Used in This Manual TrademarksCopyright DisclaimersPage Important Safety Instructions InstallationPage Power Supply Handling Page Page Maintenance and Inspection Page Consumables Other WarningsCopying Guide Super G3 FAX Board CD-ROM System Requirements WindowsUsing the CD-ROM Menu Before You Start Using This Machine1 Installation Location and Handling Installation PrecautionsAvoid installing the machine in direct sunlight 4Installation Location and Handling Avoid exposing the machine to rapid changes in temperature Select a Safe Power Supply Provide Adequate Installation Space Moving the Machine Handling Precautions Do not attempt to disassemble or modify the machineOFF Before You Start Using This Machine What This Machine Can Do IR2020/iR2016 incorporates a wideFaxing optional System Configuration and Parts External ViewInternal View Optional Equipment Control Panel Parts Main Control PanelCounter Check key Facsimile Control Panel Main Power and Control Panel Power How to Turn on the Main PowerInitializing Enter DEPT.ID Insert Control Card Control Panel Power Switch Things You Must Do Before Using This Machine Connecting the Telephone LineADD. Functions 3.FAX Settings Type of Telephone LineTEL Line Type Touch Tone ADD. Functions 6.TIMER Settings Current Date and TimeTimer Settings 2.DATE Type Select User Settings 1.UNIT Telephone # Registering This Machine’s Fax NumberUnit Name Canon Registering the Unit’s Name32Things You Must Do Before Using This Machine Routine Maintenance Load Paper Drawer 1 A4 Loading PaperLoading Paper Push down the metal plate to lock Load the paper stack into the paper drawer 6Loading Paper Toner LOW Prepare NEW Toner OUT of Toner Change Toner Replacing the Toner Cartridge8Replacing the Toner Cartridge Routine Maintenance 10Replacing the Toner Cartridge Turn the toner cartridge in the direction of the arrow Close the front cover Troubleshooting3 Clearing Paper Jams Clearing Paper Jams 4Clearing Paper Jams List of Error Messages Self-Diagnostic DisplayClose COVER/FEEDER Cover Document TOO Long No DOCUMENT/CHECK Feeder Output Tray Full Staple JAM/OPEN Finisher Cover Appendix4 Multi-functional Operation Fax Previous job Next job Available Paper Stock Available loading place Paper set placeA4R 6Available Paper Stock Page Canon