Xerox Nuvera® 100/120/144 EA Digital Production System - Customer Expectations Document
System Configuration and Installation
Installation Preparation Document
This section should be used in conjunction with the Xerox Nuvera® 100/120/144 EA Digital Production System Installation Planning Guide (IPG), the Xerox Nuvera® 100/120/144 EA Digital Production System Installation Preparation Document (IPD), and the supported inline DFA Finishing Device Solution Planning Guide, which contain detailed specifications for size, weight, electric, and environmental conditions. Only the most important requirements are stated here.
Customer Responsibilities
The following must be completed before system delivery and will be assessed in the final site check:
Item
Comments
Identify placement of the system |
|
Ensure the printer can be delivered to the |
|
site |
|
Supply the appropriate electrical connections | Dedicated power required |
Install an exhaust duct to vent hot air to the | Heat vent kit is available (for stationary system |
air system or the outside if required | installations only). The kit lowers the system’s output |
| from the nominal running heat emission level (see the |
| Environmental Factors table) to 8,500 BTU/hr. |
Install a network drop for Internet access | Automatic upload of data for remote diagnostics |
Verify the strength and slope of the floor |
|
Meet room Environmental Specifications for | This is essential to the system’s ability to perform as |
temperature and relative humidity year round | expected; Xerox will not be able to resolve |
| performance problems encountered when the area is |
| not maintained within this operating range. |
Connect system to network including proxy |
|
server information |
|
System Installation
System installation can take from 4 to 6 hours for a basic system, to 9 to 11 hours or more, depending on the number of feeders, finishers and system options being installed.
Availability
As with any other printing process, you will not plan production to the raw speed of the printer.
Your Xerox Nuvera® 100/120/144 EA Digital Production System will be available to you on a monthly average 92% to 95% of the time.
•Availability is defined, as all the time the machine is not being serviced or waiting for service by Xerox.
•Given similar service coverage, DocuTech® / DocuPrint® availability averages up to 95%.
Although the service call rate may exceed current DocuTech® products in the same speed range, overall system availability will become comparable.
Planning for volume requires taking many factors into account in addition to printer availability. These factors include
- 15 -