Xerox 144, 120 specifications Pro Plus Finisher, Insertion Tray, Hole Punch

Xerox Nuvera® 100/120/144 EA Digital Production System - Customer Expectations Document

Other 100-sheet stapler cartridge typical minimum capabilities:

-70 sheets for 28lb (105 gsm) of paper sized 8.5" x 14 or less

-30 sheets for 80lb cover (216gsm), all paper sizes

-20 sheets for 28lb (105gsm) Color Expressions and equivalent papers, all paper sizes

Other 50-sheet stapler cartridge typical minimum capabilities:

-35 sheets for 28lb (105 gsm), all paper sizes (including CX and equivalent papers)

-15 sheets for 80lb cover (216gsm), all paper sizes

-20 sheets for 28lb (105gsm) Color Expressions and equivalent papers

Staple Cartridge Limitation: The machine software does not distinguish between the 50 sheet staple cartridge and the 100 sheet staple cartridge. This means that if the 50 sheet staple cartridge is loaded in the machine, and a job with more than 50 sheets is sent to be stapled, a mis-staple or stapler jam will probably occur. If the 50 sheet staple cartridge is used, it is the responsibility of the operator to ensure that jobs exceeding 50 sheets are not submitted for stapling.

This product is not DFA compatible.

Booklet Maker Note: When using the booklet maker, some pre-printed cover sheets may exhibit tear-off from the stapled booklet, depending on the pre-printed ink area coverage and ink type. It is advisable to verify your application prior to production.

Pro Plus Finisher

Includes capabilities above plus Hole Punch capabilities as well as Insertion Tray capability

Top Tray / Offset Stacker / Stapler / Booklet Maker / Z-fold / C-fold: same capabilities and limitations as above

Sub-system	Feature	Comments
Insertion Tray	200 sheet capacity (20 lb. Bond, 75gsm)	• Inserts can be delivered to the top tray,
	6.93” x 8.0” to 11.73” x 18.5”	main tray, or the booklet maker
	176 x 203 mm to 298 x 470 mm	• Tabs must be forward collated, and should
		be loaded with the tab edge leading
		• Mixed size media are not supported
Hole Punch	2 / 3 (standard), or 2 / 4 (optional) hole punching	• Punched sheets can be delivered to the top
	for North American markets	tray or the main tray
	2 / 4 (standard), or 2 / 3 (optional) hole punching	• The upper limit of media weight that can be
		punched is 110 lb. Bond (200 gsm)
	for European markets	• Punching should not be used on
	• 2-hole punch for stock size ranges:	Transparencies, Labels and Synthetic or
		Modified media.
	5.83” x 8.0” to 12.64” x 18.0”	• 4-hole punching on letter and ledger
	148 x 203 mm to 321 x 457mm	(11”/279mm cross-process length) media
	• 3-hole punch for stock size ranges:	should not be used in conjunction with
	5.83” x 9.13” to 12.64” x 18.0”	single stapling (staple will overlap the
	148 x 232 mm to 321 x 457mm	punched hole).
	• 4-hole punch for stock size ranges:	• The 2 / 4 hole punching has all holes
	5.83” x 10.04” to 12.64” x 18.0”	equally spaced, with 80mm between holes
	148 x 255 mm to 321 x 457mm	(7mm dia.). This is not a Swedish 4 hole
	Punched sheets Chad Bin capacity is 15,000	punch configuration; currently we do not
		support that configuration.

- 41 -