Xerox Nuvera® 100/120/144 EA Digital Production System - Customer Expectations Document
Compatible Media List
The media listed on the following pages have been tested and approved for use in the Xerox Nuvera® DPS (when using a supported Inline DFA Finishing device, please refer to the individual Inline DFA Finishing Device Solution Planning Guide for a list of supported media types).
The Xerox Nuvera® Digital Production system images on a wide range of both coated and uncoated papers (uncoated papers only in configurations using an MFF). Results may vary depending on the paper used. We are pleased to consult with you to help you maximize your objectives.
Coated stocks should be used in environmental conditions where the ambient temperature is between 60° and 72°F and the relative humidity is between 20% and 55%. Coated stocks may exhibit issues such as higher jam rates, smearing, loss of halftone image quality, mottle, and light solid areas. Optimized printing may not be possible across the entire weight range of coated papers. Coated stocks under 120gsm may exhibit degraded performance - avoid any images with greater than 25% toner area coverage and dark images along the lead edge of sheets; also, machine to machine variation and tolerance stack ups may result in successful performance on one machine and not another.
Successful printing on
The Xerox Supplies Group will be available to test particular media in a customer’s application.
For more information about media, please see the Xerox Nuvera® Digital Production System Paper Guide available at www.xerox.com.
For information regarding specific substrates use in the Xerox Nuvera® DPS, please call Xerox Supplies at (800)
For More Information and Pricing contact your Xerox Supplies Representative, authorized Xerox merchant, or visit us on the web at www.xerox.com.
- 18 -