Xerox 120, 144 Inserter Module IM, Insertion Module used with Comments Multifunction Finisher

Xerox Nuvera® 100/120/144 EA Digital Production System - Customer Expectations Document

Inserter Module (IM)

One inserter may be installed on the output side of the printer. Either the 4-tray SFM or the 2-tray Large Format SFM can be used as an inserter. The specifications for the Insertion Module are the same as for the SFMs, except as noted in the table below, for the configuration when an insertion module is used with the Multifunction Finisher:

Item	Insertion Module used with the	Comments
	Multifunction Finisher
Input Sizes	• Trays 1 & 2 (SFM):	− A5 and Statement cannot be fed from
	7” x 10” to 9” x 12.6”	any of the trays in the Insertion Module.
	(178mm x 254mm to 228.6mm x 320mm)	− Tabs cannot be fed from the Insertion
	• Trays 1 & 2 (LFSFM):	Module to the MFF Finisher (tabs
	7.17” x 10” to 12.6” x 18.5”	orientation incompatibility between the IM
	(182.1mm x 254mm to 320mm x 469.9mm)	and the MFF).
	• Trays 3 & 4 (available on SFM only):
	7.17” x 10.0” to 12.6” x 18.5”
	(182.1mm x 254mm to 320mm x 469.9mm)

COMMENTS

•LCDS and IPDS applications are currently not able to pull paper stocks from the Insertion Module.

- 36 -