Alarms, Communications Port, Pin 5 Ground

PRODUCT DIAGNOSTICS

Alarms

ON-BATTERY

When the UPS is operating on the batteries, the On-Line LED will blink and the audible alarm will sound every 10 seconds. The alarm will stop once the UPS returns to On-Line operation.

UPS FAULT

When the UPS detects a hardware fault, the Fault LED will illuminate and the UPS will emit a sustained tone. The fault condition can be reset by turning the UPS OFF and then ON.

OVERLOAD

When the amount of load attached to the UPS exceeds its power rating, the Overload LED will illuminate and the UPS will emit a sustained tone. This alarm will remain on until the excess load is removed or the UPS self-protection circuit shuts the UPS down.

REPLACE BATTERY

The UPS automatically tests the battery condition and will illuminate the Weak/Bad Battery LED and emit a short beep. This tone will be repeated every hour until the battery passes a self-test. It is recommended that the UPS be allowed to charge overnight before performing a battery test to confirm a Weak/Bad Battery condition.

LOW-BATTERY WARNING

The UPS will emit two consecutive beeps every five seconds when the battery reserve runs low. This continues until AC returns or the UPS shuts down from battery exhaustion.

PRODUCT DIAGNOSTICS

Communications Port

The communications port is a standard DB9 female with both RS232 and simulated contact closure capability. The OmniGuard units will poll the port and activate it for RS232 or contact closure in accordance with the type of cable it finds connected to the port. Changing the port configuration requires that the unit be turned off and restarted with the desired cable connected. The pin-out for the port is depicted below.

DB9 Standard Pin-Out:

Pin 1: Battery low

Pin 2: /TXD

Pin 3: /RXD

Pin 4: UPS shutdown

Pin 5: Ground

Pin 6:Instant off (Pull and hold this pin low to turn off the UPS. Release this pin from low to restart the UPS.)

Pin 7: Not used

Pin 8: AC fail signal

Pin 9:ATX wake-up signal

F6C110-RKM-2U specifications

The Belkin F6C110-RKM-2U is a versatile and efficient power management solution designed to meet the growing demands of modern electronic devices. This 10-outlet power strip is not only a reliable source of power but also integrates advanced technologies to enhance safety, reduce energy consumption, and provide excellent surge protection.

One of the main features of the Belkin F6C110-RKM-2U is its robust surge protection. Equipped with a 3940 Joule surge protection rating, this power strip is capable of safeguarding your valuable devices from voltage spikes and surges caused by lightning strikes or electrical fluctuations. This makes it an ideal choice for home offices, entertainment setups, and any other electronic environments where sensitive equipment is utilized.

In addition to surge protection, the F6C110-RKM-2U also offers EMI/RFI filtering, which helps to minimize electromagnetic interference and radio frequency interference. This technology ensures that your devices operate seamlessly without any disruptions caused by electrical noise, which is particularly important for audio and video equipment.

Another notable characteristic of this power strip is its space-saving design. The F6C110-RKM-2U features a compact and slim profile that allows for easy placement in tight spaces, whether it be behind a desk or on a wall-mounted shelf. Its flat plug design facilitates close placement to walls or furniture, reducing the risk of tangles and mess.

The power strip also incorporates an energy-efficient solution with its intelligent circuitry, which monitors and distributes power to devices connected to it. This not only extends the lifespan of your electronics but also contributes to energy savings in households and offices.

For added convenience, the Belkin F6C110-RKM-2U features a 6-foot long power cord, providing flexibility in placement and reducing the need for additional extension cords. Additionally, the power strip is equipped with a signature green LED indicator, which illuminates to indicate that the surge protection is active.

Overall, the Belkin F6C110-RKM-2U is a reliable power management tool that combines safety, convenience, and efficiency. Whether you are protecting your home theater system, office equipment, or gaming consoles, this power strip stands out as a practical solution for modern power needs.