Mounting the UPS within the Rack

PRODUCT INSTALLATION

The OmniGuard Rackmount UPS includes a mounting kit, which includes two mounting brackets for a standard 19-inch (48.3cm) rack and eight retaining screws for mounting the brackets to the UPS device. Note that the screws and nats necessary for mounting the UP actual rack are included.included111111 Other configurations are also available as options including: mounting brackets for a 23-inch (58.4cm) standard rack, vertical mounting, or wall mounting.

Attaching the Brackets to the UPS

To prepare the UPS for mounting, you need to attach the mounting brackets first to the UPS device. The mounting bracket screw holes are located on the side panels of the UPS, toward the front of the UPS. Align the mounting bracket with the mounting bracket screw holes and then attach the mounting bracket using four retaining screws for each bracket.

Diagram 1: Mounting the UPS into the Rack

Attaching the Brackets to the Rack

Locate the appropriate rackmount screws associated with your rack. Align the mounting bracket with the mounting bracket screw holes and then attach the mounting bracket using the appropriate rack screws.

PRODUCT INSTALLATION

CAUTION! Use two or more people when installing the UPS into the rack. Use caution, the UPS is extremely heavy. Do not move the rack after the units have been installed. The rack may be unstable due to the weight distribution. Now the UPS is ready for the normal start-up procedure.

Connecting to an AC Power Source

Once physically installed, plug the UPS into a two-pole, three-wire, grounded receptacle only. Do not use extension cords or adapter plugs as these devices create additional issues with the electrical flow and will void the Belkin power warranty associated with the UPS.

Important: After plugging in the UPS, check the Site Wiring Fault (SWF) LED on the front panel of the unit. If the LED is illuminated, then the UPS is plugged into an improperly wired AC outlet.

CAUTION! If the UPS indicates a site-wiring fault, have a qualified electrician correct the problem.

Charging the Battery

The OmniGuard Rackmount UPS will charge the internal batteries whenever the unit is connected to an AC power source and the circuit breaker on the back panel is in the “On” position. It is recommended that the batteries be charged for a minimum of four hours before use. If the UPS is used immediately, battery run time may be less than normally expected.

F6C110-RKM-2U specifications

The Belkin F6C110-RKM-2U is a versatile and efficient power management solution designed to meet the growing demands of modern electronic devices. This 10-outlet power strip is not only a reliable source of power but also integrates advanced technologies to enhance safety, reduce energy consumption, and provide excellent surge protection.

One of the main features of the Belkin F6C110-RKM-2U is its robust surge protection. Equipped with a 3940 Joule surge protection rating, this power strip is capable of safeguarding your valuable devices from voltage spikes and surges caused by lightning strikes or electrical fluctuations. This makes it an ideal choice for home offices, entertainment setups, and any other electronic environments where sensitive equipment is utilized.

In addition to surge protection, the F6C110-RKM-2U also offers EMI/RFI filtering, which helps to minimize electromagnetic interference and radio frequency interference. This technology ensures that your devices operate seamlessly without any disruptions caused by electrical noise, which is particularly important for audio and video equipment.

Another notable characteristic of this power strip is its space-saving design. The F6C110-RKM-2U features a compact and slim profile that allows for easy placement in tight spaces, whether it be behind a desk or on a wall-mounted shelf. Its flat plug design facilitates close placement to walls or furniture, reducing the risk of tangles and mess.

The power strip also incorporates an energy-efficient solution with its intelligent circuitry, which monitors and distributes power to devices connected to it. This not only extends the lifespan of your electronics but also contributes to energy savings in households and offices.

For added convenience, the Belkin F6C110-RKM-2U features a 6-foot long power cord, providing flexibility in placement and reducing the need for additional extension cords. Additionally, the power strip is equipped with a signature green LED indicator, which illuminates to indicate that the surge protection is active.

Overall, the Belkin F6C110-RKM-2U is a reliable power management tool that combines safety, convenience, and efficiency. Whether you are protecting your home theater system, office equipment, or gaming consoles, this power strip stands out as a practical solution for modern power needs.