Belkin F6C110-RKM-2U user manual Turning the Unit On/Off, DIP Switch Settings, Self-Test

Page 9

PRODUCT DIAGNOSTICS

Turning the Unit On/Off

PRODUCT DIAGNOSTICS

DIP Switch Settings

ON/OFF/Test Switch

Press and release the “ON/OFF/TEST” switch. After one beep the unit will turn on and supply power to the load. The load is immediately powered while the UPS runs a five-second self- test. Press and release the switch (after one beep)to turn the unit off. The UPS will continue to charge the batteries whenever it is plugged in and there is AC present.

The DIP-switch setting may be changed by the user to set the desired inverter (on-battery) output voltage. The DIP switch must be set to the desired output voltage and then the unit must be turned OFF and restarted to reconfigure the microprocessor and save the change. The setting for the 120VAC units may be 110VAC, 120VAC, or 130VAC. This setting will adjust the inverter (on-battery) output voltage only. The setting for the 230VAC units may be 220VAC, 230VAC, and 240VAC.

Self-Test

ON/OFF/Test Switch

The self-test feature is useful to verify the correct operation of the UPS and the condition of the batteries. With the UPS plugged into normal AC, press and hold the “ON/OFF/TEST” switch for four seconds (four beeps) then release the switch. The UPS will perform a 10-second self-test. Note: The UPS will automatically perform a self-test on start-up and every two weeks. During the self-test the UPS will switch to battery power, the On-Line LED will blink, and the audible alarm will sound as well. The length of the test that is automatically performed every two weeks is longer than the start-up or user- invoked test. This test will run for approximately 15 seconds to measure the battery capability to provide an acceptable amount of runtime. If the UPS fails a self-test, one of the LEDs will remain illuminated indicating the type of problem.

 

Switch #1

Switch #2

Output Voltage in Battery Mode

 

 

OFF

OFF

(110VAC) (220VAC)

 

 

 

 

 

 

 

ON

OFF

(120VAC) (230VAC)

 

 

 

 

 

 

 

OFF

ON

(110VAC) (220VAC)

 

 

 

 

 

 

 

ON

ON

(127VAC) (240VAC)

 

 

 

 

 

 

 

 

 

 

 

CAUTION! When reconfiguring the DIP-switch settings, make certain that the output settings do NOT exceed the capacity of the connected equipment.

16

17

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Belkin OmniGuard Rackmount UPS Introduction Table of ContentsPage Highlights OverviewPackage Contents Quick Start Product InstallationCharging the Battery Connecting to an AC Power SourceMounting the UPS within the Rack Attaching the Brackets to the UPSConnecting your Equipment Product DiagnosticsDIP Switch Settings Turning the Unit On/OffSelf-Test Communications Port AlarmsDB9 Standard Pin-Out Pin 2 /TXD Pin 3 /RXDCommunications Port Connection Software Features & InstallationSelect the UPS page, and then click on Select… Maintenance FaqsBattery Replacement Symptom Possible Cause What To DoObtaining Service Battery Replacement InstructionsOmniGuard TM Rackmount UPS Specifications 120VAC models Technical SpecificationsPage P74264

F6C110-RKM-2U specifications

The Belkin F6C110-RKM-2U is a versatile and efficient power management solution designed to meet the growing demands of modern electronic devices. This 10-outlet power strip is not only a reliable source of power but also integrates advanced technologies to enhance safety, reduce energy consumption, and provide excellent surge protection.

One of the main features of the Belkin F6C110-RKM-2U is its robust surge protection. Equipped with a 3940 Joule surge protection rating, this power strip is capable of safeguarding your valuable devices from voltage spikes and surges caused by lightning strikes or electrical fluctuations. This makes it an ideal choice for home offices, entertainment setups, and any other electronic environments where sensitive equipment is utilized.

In addition to surge protection, the F6C110-RKM-2U also offers EMI/RFI filtering, which helps to minimize electromagnetic interference and radio frequency interference. This technology ensures that your devices operate seamlessly without any disruptions caused by electrical noise, which is particularly important for audio and video equipment.

Another notable characteristic of this power strip is its space-saving design. The F6C110-RKM-2U features a compact and slim profile that allows for easy placement in tight spaces, whether it be behind a desk or on a wall-mounted shelf. Its flat plug design facilitates close placement to walls or furniture, reducing the risk of tangles and mess.

The power strip also incorporates an energy-efficient solution with its intelligent circuitry, which monitors and distributes power to devices connected to it. This not only extends the lifespan of your electronics but also contributes to energy savings in households and offices.

For added convenience, the Belkin F6C110-RKM-2U features a 6-foot long power cord, providing flexibility in placement and reducing the need for additional extension cords. Additionally, the power strip is equipped with a signature green LED indicator, which illuminates to indicate that the surge protection is active.

Overall, the Belkin F6C110-RKM-2U is a reliable power management tool that combines safety, convenience, and efficiency. Whether you are protecting your home theater system, office equipment, or gaming consoles, this power strip stands out as a practical solution for modern power needs.
Top Page Image Contents