Belkin F6C110-RKM-2U user manual Product Diagnostics, Connecting your Equipment

Page 8

PRODUCT INSTALLATION

Connecting your Equipment

Plug the equipment into the output receptacles on the back panel of the unit. If your UPS is a 3U rack, there are a total of eight outlets, with seven outlets providing backup plus surge protection and one outlet for surge-only protection. However, if your UPS is a 2U rack, there are a total of six outlets, with five outlets providing backup plus surge protection and one outlet for surge-only protection. Please ensure that you do not exceed the maximum output rating (watts) of the UPS (refer to the UPS’ back panel or the Technical Specifications section).

Note: Connecting the RS232 computer interface port to a computer is necessary to run the software but is optional.

Note: Connecting to the computer interface port is optional. The UPS works properly without a connection.

Note: Connecting to the telephone/network surge protection connection is optional. The UPS works properly without a connection.

CAUTION! Do not connect a laser printer to the battery backup receptacles on the UPS unless the UPS is rated 2000VA or greater. A laser printer draws significantly more power when printing than at idle, and may overload the UPS.

CAUTION! RJ 45 Port Use only 26 AWG phone line.

PRODUCT DIAGNOSTICS

(2U Rack, 120VAC models shown)

(2U Rack, 230VAC models shown)

UPS OutputSurge Only

UPS OutputSurge Only

Circuit

Circuit

Breaker

Breaker

 

Protect

Caution:

Caution:

 

Use only

 

26 AWG

Power

Phone Line

Power

Input

Input

RS232

RS232

(3U Rack, 120VAC models shown)

(3U Rack, 230VAC models shown)

Fig. 3: Rear Panel

1.The computer interface port is for the UPS monitoring and control.

2.The RJ45/RJ11 modular connectors are used for 10Base-T network/single-line telephone surge protection.

3.The output receptacles are NEMA 5-15R type. (IEC output sockets on 230VAC models)

4.The output circuit breakers will trip in the event the individual banks of the output receptacles exceed the rating of the circuit breaker. (Not on all models)

5.The input circuit breaker will trip in the event the load exceeds the UPS’ power rating.

6.The input power cord has a NEMA 5-15P connector. (IEC input socket on 230VAC models)

7.The DIP switch setting may be changed by the user to set the desired inverter (on-battery) output voltage.

8.The “Surge Only” output receptacle is for surge protection only. It is not battery backed-up.

14

15

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Belkin OmniGuard Rackmount UPS Table of Contents IntroductionPage Overview HighlightsPackage Contents Product Installation Quick StartConnecting to an AC Power Source Charging the BatteryMounting the UPS within the Rack Attaching the Brackets to the UPSProduct Diagnostics Connecting your EquipmentSelf-Test DIP Switch SettingsTurning the Unit On/Off Alarms Communications PortDB9 Standard Pin-Out Pin 2 /TXD Pin 3 /RXDSoftware Features & Installation Communications Port ConnectionSelect the UPS page, and then click on Select… Faqs MaintenanceBattery Replacement Symptom Possible Cause What To DoOmniGuard TM Rackmount UPS Obtaining ServiceBattery Replacement Instructions Technical Specifications Specifications 120VAC modelsPage P74264

F6C110-RKM-2U specifications

The Belkin F6C110-RKM-2U is a versatile and efficient power management solution designed to meet the growing demands of modern electronic devices. This 10-outlet power strip is not only a reliable source of power but also integrates advanced technologies to enhance safety, reduce energy consumption, and provide excellent surge protection.

One of the main features of the Belkin F6C110-RKM-2U is its robust surge protection. Equipped with a 3940 Joule surge protection rating, this power strip is capable of safeguarding your valuable devices from voltage spikes and surges caused by lightning strikes or electrical fluctuations. This makes it an ideal choice for home offices, entertainment setups, and any other electronic environments where sensitive equipment is utilized.

In addition to surge protection, the F6C110-RKM-2U also offers EMI/RFI filtering, which helps to minimize electromagnetic interference and radio frequency interference. This technology ensures that your devices operate seamlessly without any disruptions caused by electrical noise, which is particularly important for audio and video equipment.

Another notable characteristic of this power strip is its space-saving design. The F6C110-RKM-2U features a compact and slim profile that allows for easy placement in tight spaces, whether it be behind a desk or on a wall-mounted shelf. Its flat plug design facilitates close placement to walls or furniture, reducing the risk of tangles and mess.

The power strip also incorporates an energy-efficient solution with its intelligent circuitry, which monitors and distributes power to devices connected to it. This not only extends the lifespan of your electronics but also contributes to energy savings in households and offices.

For added convenience, the Belkin F6C110-RKM-2U features a 6-foot long power cord, providing flexibility in placement and reducing the need for additional extension cords. Additionally, the power strip is equipped with a signature green LED indicator, which illuminates to indicate that the surge protection is active.

Overall, the Belkin F6C110-RKM-2U is a reliable power management tool that combines safety, convenience, and efficiency. Whether you are protecting your home theater system, office equipment, or gaming consoles, this power strip stands out as a practical solution for modern power needs.
Top Page Image Contents