Obtaining Service

MAINTENANCE

OmniGuard TM Rackmount UPS

Battery Replacement Instructions

Important Please Read The Warnings And Instructions Before Attempting To Replace The Batteries:

1.Turn off all connected equipment that is plugged into the UPS

2.Press and release, after one beep, the ON/OFF button of the front panel

3.Remove the front Bezel of the UPS

4.Unplug the connected equipment form the UPS

5.Unplug the UPS's AC connection

6.Remove the four retaining screws form the bezel bracket

7.Using the pull-tab, pull the battery out on the left side of the UPS(if looking directly at the UPS). Do not pull the batteries out by the jumper cords.

8.Disconnect the positive (red) wire from the battery positive terminal

9.Remove the rest of the batteries, disconnect the battery jumper wires and the negative wire (black) from the battery's negative terminal

10.Reconnect the battery negative (black) wire to the negative terminal and the battery jumper wires. Verify proper polarity, negative (black) to the proper negative terminals and the battery jumper cables are connected properly.

11.Reinstall the batteries into the UPS, except for the battery on the left hand side of the UPS. Reconnect the battery positive (red) wire to the battery positive terminal. Verify proper polarity, reinstall the battery into the UPS

12. Reinstall the battery retaining bracket and the retaining screws

13. Reinstall the front bezel of the UPS

14.Dispose of the batteries properly at an appropriate recycling facility

1.Use the TROUBLESHOOTING section to eliminate obvious causes.

2.Verify there are no circuit breakers tripped. A tripped circuit breaker is the most common problem.

3.Please have the following information available BEFORE calling the Technical Support department.

b)Your name and address.

c)Where and when the unit was purchased.

d)All of the model information on the rear panel of your UPS.

e)Any information on the failure, including LEDs that may be illuminated.

f)A description of the protected equipment, including model numbers, if possible.

g)A technician will ask you for the above information and, if possible, help solve your problem over the phone. In the event that the unit requires factory service, the technician will issue you a Return Material Authorization Number (RMA #).

h)If the UPS is under warranty, the repairs will be done at no charge. If not, there will be a charge for repair.

Pack the UPS in its original packaging. If the original packaging is no longer available, ask the Technical Support technician about obtaining a new set. It is important to pack the UPS properly in order to avoid damage in transit. Never use Styrofoam beads for a packing material.

Include a letter with your name, address, daytime phone number, RMA number, a copy of your original sales receipt, and a brief description of the problem. Mark the RMA # on the outside of all packages. The factory cannot accept any package without the RMA # marked on the outside.

Tech Support Contact Information:

Phone (800) 223-5546 x2263 or Phone (310) 898-1100 x2263 Fax (310) 604-2089

F6C110-RKM-2U specifications

The Belkin F6C110-RKM-2U is a versatile and efficient power management solution designed to meet the growing demands of modern electronic devices. This 10-outlet power strip is not only a reliable source of power but also integrates advanced technologies to enhance safety, reduce energy consumption, and provide excellent surge protection.

One of the main features of the Belkin F6C110-RKM-2U is its robust surge protection. Equipped with a 3940 Joule surge protection rating, this power strip is capable of safeguarding your valuable devices from voltage spikes and surges caused by lightning strikes or electrical fluctuations. This makes it an ideal choice for home offices, entertainment setups, and any other electronic environments where sensitive equipment is utilized.

In addition to surge protection, the F6C110-RKM-2U also offers EMI/RFI filtering, which helps to minimize electromagnetic interference and radio frequency interference. This technology ensures that your devices operate seamlessly without any disruptions caused by electrical noise, which is particularly important for audio and video equipment.

Another notable characteristic of this power strip is its space-saving design. The F6C110-RKM-2U features a compact and slim profile that allows for easy placement in tight spaces, whether it be behind a desk or on a wall-mounted shelf. Its flat plug design facilitates close placement to walls or furniture, reducing the risk of tangles and mess.

The power strip also incorporates an energy-efficient solution with its intelligent circuitry, which monitors and distributes power to devices connected to it. This not only extends the lifespan of your electronics but also contributes to energy savings in households and offices.

For added convenience, the Belkin F6C110-RKM-2U features a 6-foot long power cord, providing flexibility in placement and reducing the need for additional extension cords. Additionally, the power strip is equipped with a signature green LED indicator, which illuminates to indicate that the surge protection is active.

Overall, the Belkin F6C110-RKM-2U is a reliable power management tool that combines safety, convenience, and efficiency. Whether you are protecting your home theater system, office equipment, or gaming consoles, this power strip stands out as a practical solution for modern power needs.