Belkin F6C110-RKM-2U user manual Quick Start, Product Installation

Page 6

QUICK START

To install the OmniGuard Rackmount UPS, the following steps should be followed:

1.Find a proper location for the UPS device.

2.Mount the device into an appropriate rack or alternative configuration.

3.Verify that you’re using an appropriate connector and plug into the wall.

4.Charge up your batteries for approximately four hours.

5.Connect your (output can be 110v or 120v) equipment into the backup and surge outlets.

6.Install the OmniGuard Rackmount UPS software.

7.Run the software and configure the UPS to meet your requirements.

PRODUCT INSTALLATION

CAUTION! Install the UPS in a temperature-controlled environment that is free of conductive contaminants. Select a location that will provide good air circulation for the UPS at all times. Avoid locations near heating devices, water, or excessive humidity, or where the UPS is exposed to direct sunlight. Route power cords so they cannot be walked on or damaged.

1.Elevated Operating Ambient Temperature. If installed in a closed or multiunit rack assembly, the operating ambient temperature of the rack environment may be greater than room ambient. Therefore, consideration should be given to installing the equipment in an environment compatible with the manufacturer’s maximum rated ambient temperature.

2.Reduced Airflow. Installation of the equipment in a rack should be such that the amount of airflow required for safe operation of the equipment is not compromised.

3.Mechanical Loading. Mounting of the equipment in a rack should be such that a hazardous condition is not achieved due to uneven mechanical loading.

4.Reliable Grounding. Reliable grounding of rack-mount equipment should be maintained. Particular attention should be given to supply connections other than direct connections to the branch circuit.

10

11

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Belkin OmniGuard Rackmount UPS Table of Contents IntroductionPage Overview HighlightsPackage Contents Product Installation Quick StartMounting the UPS within the Rack Connecting to an AC Power SourceCharging the Battery Attaching the Brackets to the UPSProduct Diagnostics Connecting your EquipmentDIP Switch Settings Turning the Unit On/OffSelf-Test DB9 Standard Pin-Out AlarmsCommunications Port Pin 2 /TXD Pin 3 /RXDSoftware Features & Installation Communications Port ConnectionSelect the UPS page, and then click on Select… Battery Replacement FaqsMaintenance Symptom Possible Cause What To DoObtaining Service Battery Replacement InstructionsOmniGuard TM Rackmount UPS Technical Specifications Specifications 120VAC modelsPage P74264

F6C110-RKM-2U specifications

The Belkin F6C110-RKM-2U is a versatile and efficient power management solution designed to meet the growing demands of modern electronic devices. This 10-outlet power strip is not only a reliable source of power but also integrates advanced technologies to enhance safety, reduce energy consumption, and provide excellent surge protection.

One of the main features of the Belkin F6C110-RKM-2U is its robust surge protection. Equipped with a 3940 Joule surge protection rating, this power strip is capable of safeguarding your valuable devices from voltage spikes and surges caused by lightning strikes or electrical fluctuations. This makes it an ideal choice for home offices, entertainment setups, and any other electronic environments where sensitive equipment is utilized.

In addition to surge protection, the F6C110-RKM-2U also offers EMI/RFI filtering, which helps to minimize electromagnetic interference and radio frequency interference. This technology ensures that your devices operate seamlessly without any disruptions caused by electrical noise, which is particularly important for audio and video equipment.

Another notable characteristic of this power strip is its space-saving design. The F6C110-RKM-2U features a compact and slim profile that allows for easy placement in tight spaces, whether it be behind a desk or on a wall-mounted shelf. Its flat plug design facilitates close placement to walls or furniture, reducing the risk of tangles and mess.

The power strip also incorporates an energy-efficient solution with its intelligent circuitry, which monitors and distributes power to devices connected to it. This not only extends the lifespan of your electronics but also contributes to energy savings in households and offices.

For added convenience, the Belkin F6C110-RKM-2U features a 6-foot long power cord, providing flexibility in placement and reducing the need for additional extension cords. Additionally, the power strip is equipped with a signature green LED indicator, which illuminates to indicate that the surge protection is active.

Overall, the Belkin F6C110-RKM-2U is a reliable power management tool that combines safety, convenience, and efficiency. Whether you are protecting your home theater system, office equipment, or gaming consoles, this power strip stands out as a practical solution for modern power needs.
Top Page Image Contents