Belkin F6C110-RKM-2U user manual Software Features & Installation, Communications Port Connection

Page 11

SOFTWARE FEATURES & INSTALLATION

Communications Port Connection

Setting Up OmniGuard Power Management Software and The Interface Cable Power Management software and interface cable kits can be used with the UPS. Use only approved interface cables with this UPS. Connect the interface cable to the 9-pin communication port on the rear panel of the UPS. Secure the connector to the UPS via the screws on the connector housing. Connect the other end of the cable to the device or computer that will be monitoring/controlling the UPS. Please check the setup instructions in the software manual located with the CD.

Setting Up Windows Internal Power Management for UPS Service

Note 1: Wake Up and Auto Power-On ATX PC

When AC returns, if the user wants the UPS to power up the PC equipped with ATX power, our UPS has two methods in order to do this function:

1.Enable the wake-up by modem in the PC BIOS, and then connect the UPS and PC with RS232 cable. When AC returns, the UPS will send a signal to start up the PC by RS232 cable.

2.Enable the AC return restart in the PC BIOS (if your PC BIOS can support this function), and when the AC returns, then the PC will start up directly.

If you don’t need to have your PC auto power on after auto shutdown, you may just set up Windows internal power management for UPS service as follows:

When there is a utility failure, the UPS will send the AC-fail and low-battery signals to the PC, and Windows will shut down and send back to the UPS a shutdown signal. The UPS will be off automatically after the PC is off. The UPS will be on automatically when utility is recovered. The PC will assume the power from your UPS. If you have set up your PC to wake-up or auto restart in BIOS as described in the foregoing note, your PC will be turned on automatically.

SOFTWARE FEATURES & INSTALLATION

1.Open your Windows 2000 Control Panel by clicking on “Start”, “Setting”, “Control Panel”.

2.Double-click on the Control Panel’s “Administrative Tools” icon.

3.Double-click the “Services” icon.

20

21

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Belkin OmniGuard Rackmount UPS Introduction Table of ContentsPage Highlights OverviewPackage Contents Quick Start Product InstallationAttaching the Brackets to the UPS Connecting to an AC Power SourceCharging the Battery Mounting the UPS within the RackConnecting your Equipment Product DiagnosticsSelf-Test DIP Switch SettingsTurning the Unit On/Off Pin 2 /TXD Pin 3 /RXD AlarmsCommunications Port DB9 Standard Pin-OutCommunications Port Connection Software Features & InstallationSelect the UPS page, and then click on Select… Symptom Possible Cause What To Do FaqsMaintenance Battery ReplacementOmniGuard TM Rackmount UPS Obtaining ServiceBattery Replacement Instructions Specifications 120VAC models Technical SpecificationsPage P74264

F6C110-RKM-2U specifications

The Belkin F6C110-RKM-2U is a versatile and efficient power management solution designed to meet the growing demands of modern electronic devices. This 10-outlet power strip is not only a reliable source of power but also integrates advanced technologies to enhance safety, reduce energy consumption, and provide excellent surge protection.

One of the main features of the Belkin F6C110-RKM-2U is its robust surge protection. Equipped with a 3940 Joule surge protection rating, this power strip is capable of safeguarding your valuable devices from voltage spikes and surges caused by lightning strikes or electrical fluctuations. This makes it an ideal choice for home offices, entertainment setups, and any other electronic environments where sensitive equipment is utilized.

In addition to surge protection, the F6C110-RKM-2U also offers EMI/RFI filtering, which helps to minimize electromagnetic interference and radio frequency interference. This technology ensures that your devices operate seamlessly without any disruptions caused by electrical noise, which is particularly important for audio and video equipment.

Another notable characteristic of this power strip is its space-saving design. The F6C110-RKM-2U features a compact and slim profile that allows for easy placement in tight spaces, whether it be behind a desk or on a wall-mounted shelf. Its flat plug design facilitates close placement to walls or furniture, reducing the risk of tangles and mess.

The power strip also incorporates an energy-efficient solution with its intelligent circuitry, which monitors and distributes power to devices connected to it. This not only extends the lifespan of your electronics but also contributes to energy savings in households and offices.

For added convenience, the Belkin F6C110-RKM-2U features a 6-foot long power cord, providing flexibility in placement and reducing the need for additional extension cords. Additionally, the power strip is equipped with a signature green LED indicator, which illuminates to indicate that the surge protection is active.

Overall, the Belkin F6C110-RKM-2U is a reliable power management tool that combines safety, convenience, and efficiency. Whether you are protecting your home theater system, office equipment, or gaming consoles, this power strip stands out as a practical solution for modern power needs.
Top Page Image Contents