Belkin PM01110 user manual 105

Troubleshooting

Table of Contents sections 1 2 3 4 5 6 7 8 9 10

Problem:

I am having difficulty setting up Wi-Fi Protected Access (WPA) security on a Belkin client card (Wireless Network Card or Adapter) for a home network.

Solution:

Clients must use the same key that the G Wireless Router or access point uses. For instance, if the key is “Smith Family Network Key” in the G Wireless Router or access point, the clients must also use that same key.

1.Double-click the “Signal Indicator” icon to bring up the “Wireless Network Utility” screen. The “Advanced” button will allow you to view and configure more options of your client card.

2.Once the “Advanced” button is clicked, the Belkin Wireless LAN Utility will appear. This Utility will allow you to manage all the advanced features of the Belkin client card.

3.Under the “Wireless Network Properties” tab, select a network name from the “Available Networks” list and click the “Properties” button.

4.Under “Network Authentication”, select “WPA-PSK”.

5.Type your WPA key in the “Network key” box.

Important: WPA-PSK is a combination of numbers and letters from A-Z and 0-9. For WPA-PSK, you can enter eight to 63 characters. This network key needs to match the key you assign to your G Wireless Router or access point.

6.Click “OK”, then “Apply” to save the settings.

G Wireless Router 105