Alternate Setup Method
Table of Contents | sections | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 |
1. PPTP Account |
|
|
|
| 6. | My IP Address |
|
|
|
|
Provided by your ISP. Enter your PPTP User ID here.
Provided by your ISP. Enter the IP address here. (Only available when user selects “Use Static IP address” from IP Address Assignment above.)
2.PPTP Password
Type in your password and retype it into the “Retype Password” box to confirm it.
3.Host Name
Provided by your ISP. Enter your host name here.
7.My Subnet Mask
Provided by your ISP. Enter the subnet mask here. (Only available when user selects “Use Static IP address” from IP Address Assignment above.)
8.Connection ID (Optional)
4.Service IP Address
Provided by your ISP. Enter your PPTP gateway/service IP address here.
5.My Internet IP
1)Get Dynamically From ISP: Getting WAN IP address from ISP automatically.
2)Use Static IP address: Need to enter ISP information below fields (My IP Address).
Provided by your ISP. Enter the connection ID here.
9.Disconnect after X minutes…
This feature is used to automatically disconnect the Router from your ISP when there is no activity for a specified period of time. For instance, placing a check mark next to this option and entering “5” into the minute field will cause the Router to disconnect from the Internet after five minutes of no Internet activity. This option should be used if you pay for your Internet service by the minute.
G Wireless Router | 38 |