Belkin PM01110 user manual Configuring the Firewall

Using the Web-Based Advanced User Interface

Table of Contents sections 1 2 3

7.Check the box that says “Enable ONLY specific Access Points to connect”.

8.In the fields named “AP1”, type in the MAC address of your secondary Access Point. When you have typed in the address, click “Apply Changes”.

9.Bridging is now set up.

4 5 6 7 8 9 10

Configuring the Firewall

Your Router is equipped with a firewall that will protect your network from a wide array of common hacker attacks including:

•IP Spoofing

•SYN flood

•Land Attack

•UDP flooding

•Ping of Death (PoD)

•Tear Drop Attack

•Denial of Service (DoS)

•ICMP defect

•IP with zero length

•RIP defect

•Smurf Attack

•Fragment flooding

•TCP Null Scan

G Wireless Router 64